Starting Majestic Kit - Any Advice?

Signed-In Members Don't See This Ad

WildcatHollow

Member
Joined
Nov 4, 2009
Messages
104
Location
Boyce, Virginia, USA
I'm about to start my first Majestic from PSI using an Ancient Mars blank I bought from Exotic. I haven't touched anything.

Before I start, is there anything I should know about the Majestic that isn't included in the directions?

Thank you for your help.

Regards,

t.
 
Signed-In Members Don't See This Ad

jttheclockman

Member
Joined
Feb 22, 2005
Messages
12,654
Location
NJ, USA.
As mentioned in the other thread and this applies to all kits make sure the tubes are clear of all glues and burrs when putting together.
 

Buzzzz4

Member
Joined
Dec 7, 2008
Messages
2,759
Location
Grand Rapids, Mi
It takes some big drill bits, so if you haven't done one this size, take your time and start small working your way up. Less blown up blanks that way. Have fun!
 

Lenny

Member
Joined
Jan 6, 2009
Messages
3,461
Location
Searsport, Maine
When drilling don't drill all the way through. Allow in length to trim it back to where the hole is. It can easily blow out if you let the drill break through. DAMHIKT

That Ancient Mars blank is a pretty one! Good Luck!
 
Top Bottom