Spalted, ambrosia... I call it wood

Signed-In Members Don't See This Ad

MRDucks2

Member
Joined
Jul 17, 2017
Messages
3,227
Location
Bristow, IN
Guy I work with called and said hey, the city cut this tree down... I saw something worth saving. Another co-worker wanted some so dropped two pieces off for him. We shall see.
AF56F194-A636-41E3-B2F3-6FB10644B6E4.jpeg

D54E6D4A-B271-4C32-9244-BBAB65118902.jpeg

2BB61FD8-6251-4CC0-91FB-04985C52DD9C.jpeg

E32EA94A-87D0-49E1-B483-81F6FEF67CA1.jpeg

6A7B7009-116B-489B-8641-26BC35E7494E.jpeg
 
Signed-In Members Don't See This Ad

mark james

IAP Collection, Curator
Joined
Sep 6, 2012
Messages
12,750
Location
Medina, Ohio
Looks like some crabapple or cherry trees that were cut down by me previously. They were very old trees, reasonably healthy, but needed to be removed for road work. I got a few slices 8" thick by 16" diameter. Very hard. Still in the garage after 10 years.
 

MRDucks2

Member
Joined
Jul 17, 2017
Messages
3,227
Location
Bristow, IN
I have some Cherry pieces about 10" across sealed up and drying, too. It came out of my back yard along with a smaller piece of Black Locust. I ran to Cincinnati for these.
 

Chasboy1

Member
Joined
Jan 11, 2019
Messages
180
Location
Morristown, NJ
I started reducing the height of an ash stump that's been aging for about 3 years now and found some interesting chunks that might have interesting results. Not sure if I should just leave them outside to dry more or some other treatment. I know if I bring them right inside they will dry too fast and crack.
 

MRDucks2

Member
Joined
Jul 17, 2017
Messages
3,227
Location
Bristow, IN
I started reducing the height of an ash stump that's been aging for about 3 years now and found some interesting chunks that might have interesting results. Not sure if I should just leave them outside to dry more or some other treatment. I know if I bring them right inside they will dry too fast and crack.
That's the white looking stuff you see on the pieces. I am sealing the cut ends to slow drying and minimize cracking. I have used Elmers Rot Restorer (which looks like white glue to me), old bottles of Titebond that are getting thick or crusty, latex paint (though I can't see the grain after painting). For most species of works. Some may still crack or pop anyway but I feel it is less than otherwise.
 
Top Bottom