jig

Signed-In Members Don't See This Ad
  1. Psychmike22

    The 3D printer as a shop tool.

    Hello Everyone, I am starting to learn about 3d modeling and have come up with a jig to solve a shop problem. I am now using Magic Juice from Stadium Pen Blanks. I love the product by the way. It has really improved my finishing of plastics. My garage shop is not heated and I have been shaking...
  2. GDIS46

    ULTIMATE PEN SEGMENTING SLED

    I have been wanting to get into segmenting but quickly realized you need a good table saw sled to do that. So I searched for as many ideas as I could and have come up with a basic design that will accomodate 0° vertical cuts for trimming blank width, 90° horizontal cuts for cutting blanks to...
  3. J

    DIY Pen Press

    I have been looking at pen presses online and they all require adding and removing spacers to press. I made this with a leftover piece of t-track from a drill press table top that I made. I drilled the "bowl" area, joined 2 pieces of scrap poplar. I poured a layer of Plasti-Dip in the bowl. The...
  4. S

    Blank stopper for sanding Jig

    The Jig is made with only a few scrap materials.After watching the video at https://youtu.be/4ldiVK76gjc get your instructions at ite - Home Cheers Eric
  5. S

    Brass tube detection for my blank squaring jig

    http://www.penturners.org/photos/images/25006/medium/1_IMG_0808.JPG View in Gallery So far this is my easiest and accurate jig to use. I am in the process to write a full description. In the mean time here is a video http://youtu.be/nROJWPh3nww Cheers
  6. S

    Off center squaring pen blanks jig

    This is my off center jig that is the base for other jigs to make. http://www.penturners.org/photos/images/25006/medium/1_IMG_0793.JPG View in Gallery A full description and how to use it :ite - Home Cheers
  7. BayouPenturner

    Arbor Press

    I understand that many of our members use an arbor press to press pens together. I purchased one and can't figure out how to use it for anything except the top parts of slimline pens. Are there some jigs or fixtures that you have made to enable this press to be used? As you know now my...
  8. A

    The best blank squaring jig yet

    I wanted to make a blank squaring jig to use on my 12" disc sander but was not happy with any of the existing jigs out there. The main reasons included: -only one size of rod holding the blank -not adjustable for square, necessitating a high degree of accuracy in manufacture With those...
  9. cschimmel

    Paracord Survival Bracelet Jig,

    I made this jig for a buddy. How to make a Paracord Bracelet Jig. Paracord Survival Bracelet. - YouTube
  10. snowb46

    Pen Blank Sizing Jig

    Here is the PSI Pen Blank and Sizing Jig that runs $30. I was interested in this, but I am cheap. So in about 15-20 minutes, and some scrap pieces of wood laying around the shop, I created my own version. Works pretty good if I do say so myself. Here is my own simple version. Just used some...
  11. P

    assembly jig

    Has anybody made a pen assembly jig ? Thinking about making one and would love to here peoples thoughts on the idea...
  12. J

    Bandsaw jig for trimming blank corners?

    I am trying to trim the 90 degree corners off of some square acrylic blanks and/or wooden ones. Has anyone made a jig to do this or seen where I could information on such? My idea is to make something adjustable for different size blanks that slides in the miter slot on one of my bandsaws, I...
  13. J

    Sharpening Jig or carbide insert tool

    I have a small collection of basic turning tools, a Jet 1014, and an 8" VS delta grinder. I don't have a sharpening jig yet. My question is...Would I be better off buying a carbide insert tool or sharpening jig next??? I have way too many hobbies/activities that eat up my play money, so I'm...
  14. leestoresund

    Jointer knife alignment

    Last week Rockler had a sale on rare earth magnets. The prior week we had replaced the knives on my jointer but had only used a straight edge so we weren't really happy with it. I had some pieces of polycarbonate. We resawed the polycarbonate to about 1/2" thick and narrow enough leave room to...
Top Bottom