Carbide turning tools..

Signed-In Members Don't See This Ad
See more from TBCbushings

TBCbushings

Member
Joined
Nov 7, 2009
Messages
931
Location
Hampton, Va.
Here are some tools I made last few days. I Designed this tool to fit three inserts. The 15mm square, 15m with 2-6 inch nose radius and 17.5 mm round cutter.
 

Attachments

  • Inserts (Medium).JPG
    Inserts (Medium).JPG
    77.6 KB · Views: 733
  • Tools (Medium).JPG
    Tools (Medium).JPG
    83.7 KB · Views: 1,745
Signed-In Members Don't See This Ad

IPD_Mr

Member
Joined
Jun 27, 2007
Messages
3,707
Location
Zionsville, In
Bretty nice Brian. I would have loved to tuned in when you were making these. Seems like everytime I link in you are always cleaning. :)
 

Dorno

Member
Joined
Apr 18, 2009
Messages
185
Location
Newcastle Australia
great looking tools you have made there. I have just purchased some carbide tips to make a couple of cutter 11mm,18mm rounds and 14mm Square both straight and Radius. Do you have any tips in making them that I may be able to use ?

Cheers Ian
 

TBCbushings

Member
Joined
Nov 7, 2009
Messages
931
Location
Hampton, Va.
I machined these all in one day. I wanted a tool that you could use all three inserts and I didnt see any tool on the market like these....I have the round inserts on the way and will post pics with all three tools...
 

TBCbushings

Member
Joined
Nov 7, 2009
Messages
931
Location
Hampton, Va.
I know...Mine is a combo of the two tools...I guess I should have started out by saying my tool is the only PEN turning tool thats will fit all three inserts.. Sorry about that..
 
Last edited:

brownsfn2

Member
Joined
Jun 23, 2011
Messages
1,574
Location
Plain City, OH
I watched your video and it says you are selling them but it does not say how much. Is the square steel shaft larger diameter than the pen pro?
 

bitshird

Member
Joined
Aug 27, 2007
Messages
10,236
Location
Adamsville, TN, USA.
The pen pro will only use one insert from what I read. My pen tool will use all three, thats all im saying.
Actually the Woodchuck Pen Pro uses 2 inserts.
A 15mm by 100 mm =4 inch radius, and a 15mm by 50 mm =2 inch radius. And although it is not included with or recommended for it, the tool it will accept a 15mm square insert.
 

TBCbushings

Member
Joined
Nov 7, 2009
Messages
931
Location
Hampton, Va.
Oh ok ... I just wanted to make a tool that used the round and square inserts. You have a nice tool but you I wanted to make a tool that used the round and square inserts.
 

bitshird

Member
Joined
Aug 27, 2007
Messages
10,236
Location
Adamsville, TN, USA.
We made a bunch about 6 months ago, but due to a promise I made to the supplier of the 18mm round inserts, we have been obligated not to make a 4 inch version, I think there are about 20 of them in the scrap bin, my son in law made them while I was out of the shop for several weeks. I've tried the round insert on pens and spindle work, but I just can't hold a smooth line, I get a bunch of waves, I know several folks that have Peters Rotundo and really like it, but I just have better luck using the round inserts on inside bowl work, they are amazing for that.
 

TBCbushings

Member
Joined
Nov 7, 2009
Messages
931
Location
Hampton, Va.
I really like your tools. I saw a couple other tools with that size and wanted to make it a universal. But as I found out there are no universal size inserts like those. So I just stuck with the 18 millimeter inserts.
 

wood-of-1kind

Member
Joined
Jul 10, 2005
Messages
4,114
Location
Toronto, ON, Canada
I really like your tools. I saw a couple other tools with that size and wanted to make it a universal. But as I found out there are no universal size inserts like those. So I just stuck with the 18 millimeter inserts.


Thank you for your response. The 18mm is just "right" for pens. Keep up the good work.
 

animefan

Member
Joined
Jul 14, 2010
Messages
315
Hey are your tools made of stainless? How much are they? And how do I get one? Do you accept paypal? Do you sell the inserts without the tool? I have been looking at the woodchuck unitool and it is just to long and its too expensive.
 

robutacion

Member
Joined
Aug 6, 2009
Messages
6,514
Location
Australia - SA Adelaide Hills
Nice to see, some of our best carbide tool manufacturers talking to each other in a civilised manner, what I mean is, without making a fuss...!

The truth is, many of us have made carbide tipped tools before they have become available commercially, I know that, when I made my first, no one even talked about carbide inserts for wood work. Thankfully, in these last decade, particularly these last 4 years, carbide tools for wood workers/turners are no longer a luxury or a "have to make your own" type thing as they are now available in all sizes, shapes and forms...!

The Chinese are making them (all sorts) for under $50.00 full tool with a couple of spare inserts that I anything but "carbide", anyway they cut and work but not for long, leaving a very inexpensive shaft ready to to fitted with "proper" inserts.

Sure, the shafts are not stainless steal or of similar quality but for the price, is not much of a loss...!

Now, back to the "proper" carbide tipped tools, I have seen folks making them with the most unbelievable shapes, sizes, lengths and carbide inserts, some very weird, indeed however, they all claim to work well...

I've made my own experimentations too, and I even made a 15mm shaft made of HSS that has cost me a fortune in broken bits and taps just to make and tap 1 (one) single hole but, I done it and it did do well for some time until I decided to make another shaft out of stainless and use the 15mm HSS bar to make a nice Bedan gouge.

Yes, the idea of having one shaft to accommodate various carbide sizes and shapes inserts, was also something that I though as handy but son realised that, was not exactly what I wanted...!

Then, I made them where the shaft had one insert on each end (different sizes) where the handle had to be made in a special way to be functional and effective. Then I though that would be nice to have the various spare inserts, with the tool at all times so, in that "special handle" I hollowed it out and made room for half dozen inserts, a couple of spare screws and even the hellen key...!:eek::wink::biggrin:

Nice looking tools they are...!:) but, after some time, I decided to make each carbide insert type, with its own dedicated shaft on a fixed handled, if you have not worked out yet why, I shall only say, "simpler is better...!":wink:

There will be always those that, prefer to make their own tools, nothing to do with savings as more often than not, the tool becomes a lot more expensive when finished, than those available commercially but that's irrelevant to many people, the self satisfaction to make a "usable" tool, is quite rewarding...!

Everything single one of the people that today are making these tools for sale, have started the exact same way, experimenting to try to achieve something different and possibly better that what one know or believe available commercially, and I say this because I learn that, certain things believed to be unavailable, were in fact available if you know where to look for...!

In resume, regardless who makes these tools or who sell them, they are a great invention and a pleasure to work with, particularly if you are one of those that, regardless of how much was invested in sharpening tools and gadgets, still not capable to produce sharp tools...!

This is my story, and I stick with it...!:wink::biggrin:

PS: Nice looking tools, Nikitas...!:)

Cheers
George
 

TBCbushings

Member
Joined
Nov 7, 2009
Messages
931
Location
Hampton, Va.
Thanks George, I started out to make the tools to take two inserts all in one tool. I know there is the uni tool but I wanted a "Pen" turning tool that will do both inserts. Havent seen one on the market so I made these. I am a CNC machinist so I have the tools at my fingertips! lol I like to make these kind of things to see if I can make a good tool. I dont claim to have the best tool out there just I think it is a really good tool! One tool will fit both inserts....
I have had a lot of interest in this tool ....that being said I will see what happens!
 
Top Bottom