carba-tec measurement..HELP..

Signed-In Members Don't See This Ad
Status
Not open for further replies.
B

BUGSY

Member
Joined
Nov 3, 2005
Messages
84
Location
jacksonville, florida, USA.
i am wanting to find out the vertical measurements from the centerpoint to the flat of the bed ways...i am able to buy a duplicator very cheaply ..but i need to see if it will fit my jet..this would greatly speed up my duck call production...THANKS IN ADVANCE...bugsy
 
Randy_

Randy_

Member
Joined
Nov 29, 2004
Messages
5,701
Location
Dallas suburb, Texas, USA.
Title says Carba-Tec and the text says Jet?? Please clarify what you are looking for. PSI catalog says the swing over bed for the Carba-Tec is 6". The Jet mini is 10". If you are asking about a different Jet mention the model number. My Jet mini is spot on 10". Can't say if the Carba-Tec is ± a fraction?
 
B

BUGSY

Member
Joined
Nov 3, 2005
Messages
84
Location
jacksonville, florida, USA.
randy ....i want to buy a duplicator that was made for a carba-tec and use it on a jet 1014 ...i somehow coulsd not come up with any carba tec dimensions...at time of post ..ididnt know that psi carried carbatec lathes.....i appreciate your help ....thanks bugsy
 
Status
Not open for further replies.
Previous Next
Top Bottom