Box Elder

Signed-In Members Don't See This Ad
See more from rd_ab_penman

rd_ab_penman

Member
Joined
Jun 1, 2007
Messages
1,654
Location
Red Deer, Alberta, Canada.
Bowl measures 4-1/2" Diameter x 2-1/4" Deep with 1/8" Wall Thickness throughout. I keep making the walls thinner and thinner.
Finished with 6 coats of Minwax Satin Wipe-On-Poly and polished with Hut Ultra Gloss.

As always comments and or suggestion appreciated.
Thanks for looking.
 

Attachments

  • Roughed Out To Four and a Half Diameter X Two and a Quarter Deep.jpg
    Roughed Out To Four and a Half Diameter X Two and a Quarter Deep.jpg
    60.4 KB · Views: 126
  • Sanded Down to 400 Grit.jpg
    Sanded Down to 400 Grit.jpg
    73.2 KB · Views: 120
  • 4 Coats Minwax Wipe-On-Poly Applied.jpg
    4 Coats Minwax Wipe-On-Poly Applied.jpg
    47.8 KB · Views: 124
  • Apllied 4 Coats Minwax Wipe-On-Poly.jpg
    Apllied 4 Coats Minwax Wipe-On-Poly.jpg
    49.7 KB · Views: 129
  • Removed Tenon and Made a Foot.jpg
    Removed Tenon and Made a Foot.jpg
    63.3 KB · Views: 138
  • Side 180.jpg
    Side 180.jpg
    37 KB · Views: 130
  • Side 360.jpg
    Side 360.jpg
    38.7 KB · Views: 136
  • Inside.jpg
    Inside.jpg
    42.3 KB · Views: 125
Signed-In Members Don't See This Ad
Very Nice!

Just saw this on PP and thought what an awesome finish! Have to say I normally like oil finish for bowls, but the gloss really works on this one!
 
sweet, i done a one day bowl turning course 2 weeks ago and it was great fun, learned a lot. Bowls are a doddle aren't they :biggrin::biggrin:
 
How did you keep from crushing the foot when you were holding it in the chuck? Was is long enough that you could turn off the marked part?
 
Back
Top Bottom