W.Y.
Member
Started with the glued up cherry and walnut staves like this .
First I turned a couple jam plugs for the holes in the ends.
Then I rounded the blank and made a tenon for a chuck.
Put it in a chuck and got set up for hollowing out the inside.
Here it is hollowed out and tenon cut tenon for the lip of the S S insert.
Reversed it and put top into chuck in expanstion mode before parting off the bottom.
Turned a slightly tapered plug for the bottom.
Glued plug in place and turned a concave in the bottom and sanded it it to same 4000 grit as the rest of it.
Next will be 5 or 6 coats of polyurethene and then fasten the S S liner into it.
W.Y.
![StavesGlued.jpg](/proxy.php?image=https%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy231%2FWillysWoodcrafting%2FTurnings%2FStavesGlued.jpg&hash=212bfbd2eb722562608da6c1e10ca168)
First I turned a couple jam plugs for the holes in the ends.
![JamChucks.jpg](/proxy.php?image=https%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy231%2FWillysWoodcrafting%2FTurnings%2FJamChucks.jpg&hash=a11dddaf3644c4582ef35ae64c5547c9)
Then I rounded the blank and made a tenon for a chuck.
![Roundandtenonadded.jpg](/proxy.php?image=https%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy231%2FWillysWoodcrafting%2FTurnings%2FRoundandtenonadded.jpg&hash=e7cbc04e09a044d3512bc07a203ff603)
Put it in a chuck and got set up for hollowing out the inside.
![Readytohollowout.jpg](/proxy.php?image=https%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy231%2FWillysWoodcrafting%2FTurnings%2FReadytohollowout.jpg&hash=7b230d22180b355aba580b5feb832bd9)
Here it is hollowed out and tenon cut tenon for the lip of the S S insert.
![Hollowedoutwithtenonforcup.jpg](/proxy.php?image=https%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy231%2FWillysWoodcrafting%2FTurnings%2FHollowedoutwithtenonforcup.jpg&hash=feb90ad4c6344fe4466b9ba742723dcf)
Reversed it and put top into chuck in expanstion mode before parting off the bottom.
![Readytocutbase.jpg](/proxy.php?image=https%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy231%2FWillysWoodcrafting%2FTurnings%2FReadytocutbase.jpg&hash=7628dfbe5fb1a0530d839622e2572fce)
Turned a slightly tapered plug for the bottom.
![Taperedplug.jpg](/proxy.php?image=https%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy231%2FWillysWoodcrafting%2FTurnings%2FTaperedplug.jpg&hash=8446b7e5efcf89d5c9c289dc9a40cd9b)
Glued plug in place and turned a concave in the bottom and sanded it it to same 4000 grit as the rest of it.
![Pluggluedin.jpg](/proxy.php?image=https%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy231%2FWillysWoodcrafting%2FTurnings%2FPluggluedin.jpg&hash=f12985e2e789f7d63ac1943bcd31fc52)
Next will be 5 or 6 coats of polyurethene and then fasten the S S liner into it.
W.Y.
Last edited: