These work great and just as good in my opinion. I use and abuse them. They work on acrylics, burl wood and tru-stone just fine with no problems.
Now if im going to turn a tru-stone blank, i do make sure i have a fresh edge, other than that i will use the crap out of one cutter. It's the only tool i use, even for going from square to round
P.S. - i use the cutters that are marked "BT" they are a radius not square
But, the ones you have can be sharpened with a diamond hone and a little water.
These work great and just as good in my opinion. I use and abuse them. They work on acrylics, burl wood and tru-stone just fine with no problems.
Now if im going to turn a tru-stone blank, i do make sure i have a fresh edge, other than that i will use the crap out of one cutter. It's the only tool i use, even for going from square to round
P.S. - i use the cutters that are marked "BT" they are a radius not square
But, the ones you have can be sharpened with a diamond hone and a little water.
I must be blind, I looked everywhere for a radius "BT" and couldn't find it in the home or product page.... a little help for a dumb redneck pls
Are you sure the mentioned cutter will fit on a EWT mini rougher? I just checked a new cutter and it measured around 11mm. The one shown is 15mm.
After some searches here I found what I need here: Big Guy Productions -
He has the cutters for the EWT mini rougher 3 for $18 and $3 shipping. Half the price of what Woodcraft wants for the EWT replacement cutters. I can live with that.
Are you sure the mentioned cutter will fit on a EWT mini rougher? I just checked a new cutter and it measured around 11mm. The one shown is 15mm.
After some searches here I found what I need here: Big Guy Productions - *
He has the cutters for the EWT mini rougher 3 for $18 and $3 shipping. Half the price of what Woodcraft wants for the EWT replacement cutters. I can live with that.
Yes, that is the "R4" cutter. It is the one I prefer. I don't know where you can get the R2 cutters at a reasonable price.
Sharon
These links are great for the square cutters, but how about the round ones?
I see that now, thanks. I bookmarked it.These links are great for the square cutters, but how about the round ones?
Big guy productions link has both. Take a look.