cbb007
Member
In another thread I mentioned that I put a ca finish on all my acrylic pens and someone asked why I put a finish on acrylic.
What do you do for acrylic pens?
What do you do for acrylic pens?
I finish as wood, need to put something on the wood portion, wont hurt the restso what about the "worthless wood" pens? They are half PR and half wood...
so what about the "worthless wood" pens? They are half PR and half wood...
so what about the "worthless wood" pens? They are half PR and half wood...
Lately I have been turning wood pens, sanding with 220 grit paper and doing a CA slurry at that point. then sanding on to 600 then buffing it as well. no actual CA finish just a wood fill. still holding my breath as to how the shine will hold up over time. A quick check the other day left me with a mixed feeling about it but the light also was not that good.
if you need ca on acrylic..you are doing something wrong..this is from a 4 monther..acrylics are impossible to screw up..imhoHi CBBoo7, All i do is sand to 12000 with Micromesh, then polish with brasso, Simples!
Hope this helps Roger and out.
not a big wet sander...seems like you put your major tool in danger..