Trouble drilling on the lathe

Signed-In Members Don't See This Ad

johngmccune

Member
Joined
Mar 29, 2018
Messages
22
Location
Spring, Texas, USA
I'm having trouble drilling on the lathe because some blanks require the jaws to be at their extreme widest (and a few are simply too large) and for others -- like the rounded ones from Hobble Creek -- sometimes can't be held tightly even with the jaws at their smallest. Any comments or suggestions?
 
Also, would like to see a picture of the jaw set you are using. Larger square blanks for like bottle stoppers can be held with a standard chuck putting the points between the jaw openings.
 
Back
Top Bottom