shastastan
Member
I'm finally admitting that I've been on the finish safari and it's been for many years, too. For those of you that have found what they believe to be the very best finish (for pens, that is), Congratulations. For those of you who are using a finish that they like but continue to search. "Ah feel your pain." Currently I sand to 600 grit and use the micro polishes that I bought from Craft Supplies. After that, I apply a couple of coats of wipe on poly. Actually, I'm pretty happy with the shine from the micro polishes, but I apply the wipe on poly for durability. I used to use a 50-50 mix of Deft lacquer (gloss) and lacquer thinner. I liked this finish but it was sort of tedious. I sanded to 1200 grit. I applied 6 coats of finish, drying and buffing between each coat. Finally, I have to admit that I'm one of those woodworkers who admittedly have not spent enough time and attention to learn more about finishing. Maybe the simplicity and ease of application of wipe on poly has me under it's power? Please join in with your comments and experiences.
P.S. I just read jrista's post on another thread (re a finish study) and I learned some helpful ideas from it.
P.S. I just read jrista's post on another thread (re a finish study) and I learned some helpful ideas from it.
Last edited: