panini
Member
Just got some jr gents from smitty. I thought I had 12mm drill bit, but none around. Anyone know where I can get one. Tried looking at the vendors but no 12mm....TIA:frown:
You might try 15/32 ...... 12mm is .4724 inch and 15/32 is .46875 pretty darn close. If that doesn't work look at 31/64ths which is a tad bigger than 12mm at .4844 inch. either of those should be available locally if you have a good hardware store around.Just got some jr gents from smitty. I thought I had 12mm drill bit, but none around. Anyone know where I can get one. Tried looking at the vendors but no 12mm....TIA:frown:
I just completed one of Smittys' JG 1 kits; used a 25/64 and a 29/64. Drilled a cebloplast serpentine on the lathe and they worked perfectly. These are the same bits I use for the Baron.
Here are pictures of my son polishing and assembling the pen after it was turned. Craig is my son with Down's who loves to work in the shop every opportunity he gets.
Bill Sampson, Richmond