WriteON
Member
Best vendor for titanium 2piece ring cores. Thanks.
Yeah. He started off making pens, then got into the rings and stayed focused. Last time I talked to him, a couple of years back, everything is made either in house or local In Ottawa.Good to know. Thanks. Will click on the link and save as a Favorite for reference.
Edit: looked at the link and am impressed.
I've done several of the threaded two-piece cores, and I've generally been very happy. When done right, the seam on the interior is visible, but you can't feel it. It's important to get the thickness of the blank just right, however.I made a few 2 piece Press rings ...Very satisfied with result.
I'm considering trying a Screw together core. Other than cost any comments? Thanks, Frank
I also recommend using an adhesive with an open time of at least a few minutes on the actual threads during assembly. I've made it work with thick CA, but that's pushing it, and I've had to soak the whole mess (blank and core) in acetone because I accidentally cross-threaded on assembly or because the glue set up while I was twisting the two halves together.I made a few 2 piece Press rings ...Very satisfied with result.
I'm considering trying a Screw together core. Other than cost any comments? Thanks, Frank