Dale Allen
Member
Well, I wasn't happy with this on the first try. The blanks were too small in some places and the clip started to rotate and that damaged the blank.
So, I took it apart and used a blank of alumalite, clear I think was used, that will not take a shine unless I put CA on it.
BTW, that is not dust on the pen. There are glitter particles in the blank.
This is sized much better. Also, since I used some med CA in the assembly it is likely I'll never get it apart again. But that's OK.
So, I took it apart and used a blank of alumalite, clear I think was used, that will not take a shine unless I put CA on it.
BTW, that is not dust on the pen. There are glitter particles in the blank.
This is sized much better. Also, since I used some med CA in the assembly it is likely I'll never get it apart again. But that's OK.