Polishing interior of pen

Signed-In Members Don't See This Ad

ajsmalls

Member
Joined
Apr 29, 2020
Messages
10
Location
Chesapeake, VA
I have recently experimented with turning clear/see through pens. Is there any advice on finishing the interior of the pen so that it too will be clear? I'm currently using a 1/8 inch rod in my dremel with zona sand paper on the end but I'm not having the greatest luck. Thanks in advance for the help.


Sent from my iPhone using Penturners.org mobile app
 
Signed-In Members Don't See This Ad

elyk864

Member
Joined
Jun 12, 2017
Messages
354
Location
Phoenix, AZ
I'd find a way to attach a piece of cloth then shove a bunch of liquid polish down there and do it that way.
 

jalbert

Member
Joined
May 17, 2015
Messages
991
Location
Louisville, KY
Cut a small slit in the end of the aluminum rod, then you can secure your sandpaper, polishing cloth, etc. I'd recommend using a larger diameter rod (I use 1/4") and chucking the rod up in your lathe
 
Top Bottom