Night fire - kitless

[AbleSnail]

I was gone a little. Nevertheless, I come back. Two important things, actually three:
1. Beautiful resin came out
2. First encounter with a three-thread tap - it's great.
3. I have serious problems with cleaning threads - do you have any patent for this activity?

And finally a pen - kitless.

 

[mark james]

That is a splendid blank as well as an excellent profile. Very nice.

 

[Jim15]

Beautiful work.

 

[Dalecamino]

Very nice! Some use a soft bristle toothbrush with soapy water to clean the threads, followed with plastic polish. Some use a short bristle horse hair brush to clean the threads. Sorry I have no links for the horse hair brush, but a search should take you there.

 

[magpens]

Beautiful pen !!!

Thanks for showing !!!

 

[egnald]

Simply Fantastic! - I am so envious of you members that make pens without using kits - Dave

 

[AbleSnail]

Change of concept on the look of this pen. The section is the same color as the rest of the pen with a small brass shade. What do you say? Which one is better?

 

[PenPal]

Wonderful with threads patience and grit.Thin CA can be your friend.

Peter.

 

[AbleSnail]

Wonderful with threads patience and grit.Thin CA can be your friend.

Peter.

CA on epoxy resin?

 

[jalbert]

Change of concept on the look of this pen. The section is the same color as the rest of the pen with a small brass shade. What do you say? Which one is better?

The resin section. The brass section doesn't really tie in with the rest of the pen.

 

[Alchemist]

Nice work!


Sent from my iPhone using Penturners.org mobile app

 

[McKenzie Penworks]

One way to get slightly prettier threads is to sand/buff the tenon prior to cutting the threads. Also, after cutting the threads, put a little polish on your die and run it up and down the threads a few times to polish them up a bit.