Looking for.......

Signed-In Members Don't See This Ad

jttheclockman

Member
Joined
Feb 22, 2005
Messages
15,868
Location
NJ, USA.
I was trying to avoid casting my own blanks if possible. I am looking for full 1" X 1" thick black acrylic (pure opaque)either in block form or in pen blank size 5" or longer. Anyone have a source I saw Woodenpenpro had blanks but their shipping is too much for me. Thanks in advance.
 
Signed-In Members Don't See This Ad

qquake

Member
Joined
Feb 8, 2004
Messages
3,884
Location
Northern California



 

jttheclockman

Member
Joined
Feb 22, 2005
Messages
15,868
Location
NJ, USA.
Yes Jim looking for at least 1" X 1" square in acrylic. I just threw a block in the casting pot and will see how they come out. May have to revert to making my own. I was looking for the easy way out. Thanks everyone. I have an email out to a plastic company that I buy my thin acrylic sheets from. They do not list a sheet that is 1" thick so emailed them.
 

Penultimate

Member
Joined
Aug 22, 2010
Messages
929
Location
Bartlett, IL 60103
John,
Have you tried





This is ABS not acrylic

Good luck

I’ve got a bar of black, I think it’s 1” of. And I got it from a plastics supplier.


Sent from my iPhone using Penturners.org mobile app
 

jttheclockman

Member
Joined
Feb 22, 2005
Messages
15,868
Location
NJ, USA.
Mike I have Delvies in my sites. I am in the process of casting some blocks now. The first one was a failure. Too much dye. So will see if I have the formula now. I did these things long ago and forgot the measurements. I should have written down. I did this time if I zero in on it.

All else fails I will get from here.

https://www.canalplastic.com/
 
Top Bottom