June 8th Meeting

Signed-In Members Don't See This Ad

EBorraga

Well-Known Member
Joined
Oct 19, 2009
Messages
3,866
Location
Louisville, KY
We had planned on having next meeting at Woodcraft. They actually have a corporate gig going the same day as the meeting. So instead on switching dates,MRDUCKS2 has volunteered to host the meetup!

So the next meeting will be June 8th at 10am at Mike's Shop. His address is 2499 S US Highway 31, Franklin, Indiana. Mikes shop is fairly good size with a lathe and other tools we can use.

We're asking those that come to bring a potluck for lunch. We're gonna do lunch around 12 and then those that want to stay for a little bit can.

We are asking for demo suggestions. Keep in mind, we can learn casting and stabilizing at his shop. Whereas we cannot at Woodcraft.

So chime in on what demos you want to see!!!
 
Signed-In Members Don't See This Ad

tbfoto

Active Member
Joined
Dec 16, 2009
Messages
303
Location
Lafayette, Indiana
How about a casting demo for beginners without a pressure pot? I've never done casting before and thinking about getting my feet wet.

I'm looking forward to the meeting!

We can do that. I'm bringing PR, it doesn't need pressure. And we can demold it in an hour or so!
Yup, I too would be interested in seeing some PR casting.
 

EBorraga

Well-Known Member
Joined
Oct 19, 2009
Messages
3,866
Location
Louisville, KY

mark james

IAP Collection, Curator
Joined
Sep 6, 2012
Messages
7,899
Location
Medina, Ohio
Alas, I'll be trying to not get sun burnt or nitrogen narcosis.

I'll keep following the Indy Chapter mtg list. I will get there eventually.

Have fun!
 

Dalecamino

Well-Known Member
Joined
Jan 2, 2008
Messages
12,740
Location
Indianapolis, In.
Alas, I'll be trying to not get sun burnt or nitrogen narcosis.

I'll keep following the Indy Chapter mtg list. I will get there eventually.

Have fun!
I suppose you are permitted a break/ retirement celebration :biggrin:

Have a good time but don't forget to relax occasionally :wink:

It won't be the same without you though. Like an empty stable. :beer:
 

EBorraga

Well-Known Member
Joined
Oct 19, 2009
Messages
3,866
Location
Louisville, KY
A few weeks out still. We have decided to order Pizza for those that are gonna hang around. So bring a few dollars if you plan on eating. So far we have a few wanting to learn casting and water slide decals. Anything else you may want to see?
 

Chief TomaToe

Active Member
Joined
Oct 6, 2017
Messages
181
Location
Bloomington, Indiana
Just throwing more ideas out there, but I recently bought tools needed to make kitless pens with #6 JOWO nibs. I can bring that stuff along and we can play around with that too if anyone is interested. I don't know who might be coming that could instruct on this. I also don't know what other tools Mike may have. We might want to save that for another day if our schedule is already full.
 

Dalecamino

Well-Known Member
Joined
Jan 2, 2008
Messages
12,740
Location
Indianapolis, In.
Just throwing more ideas out there, but I recently bought tools needed to make kitless pens with #6 JOWO nibs. I can bring that stuff along and we can play around with that too if anyone is interested. I don't know who might be coming that could instruct on this. I also don't know what other tools Mike may have. We might want to save that for another day if our schedule is already full.
I haven't made a Jowo section, but if you want to bring your tools, I have a stick of ebonite. We can do some measuring, and MAYBE figure it out. If there is enough time.
 

MRDucks2

Well-Known Member
Joined
Jul 17, 2017
Messages
1,579
Location
Franklin, IN
Just throwing more ideas out there, but I recently bought tools needed to make kitless pens with #6 JOWO nibs. I can bring that stuff along and we can play around with that too if anyone is interested. I don't know who might be coming that could instruct on this. I also don't know what other tools Mike may have. We might want to save that for another day if our schedule is already full.
Yep, this will be up Chuck’s alley.
 
Top Bottom