grz5
Member
I've applied about 10 coats of minwax clear gloss spray lacquer to finish some pendants. The finish was applied in light coats where I was spraying from about 12" away. I've noticed that the spray lacquer leaves a surface comprised of many small bumps instead of a smooth one.
I've seen people mention that as the lacquer cures the finish with smooth out. Is this true or should I consider attempting to sand and buff the finish to smooth it out?
Any advice would be greatly appreciated!
Thanks.
I've seen people mention that as the lacquer cures the finish with smooth out. Is this true or should I consider attempting to sand and buff the finish to smooth it out?
Any advice would be greatly appreciated!
Thanks.