First segmented pen from my own blank

Signed-In Members Don't See This Ad

lvturner

Member
Joined
Jun 22, 2025
Messages
4
Location
Las Vegas
It's not fancy like you other guys, kind of did this "freehand" from some scraps I had laying around. Wanted to see what the glue up would turn like. Pretty happy with it! Did tune up my bandsaw after cutting this blank as it was veering lol.
IMG_2260.jpeg
IMG_2249.jpeg
 
Signed-In Members Don't See This Ad
Excellent design. I have done so many different dersigns, I thought I would run out , but there are probably many more . Any questions , don't hesitate to ask. You can see many of my segmented blanks here on IAP .
 
can u show us how . /what jigs used etc love to try
Actually didn't use any jigs. I made a long block, which is the piece on top. I then cut that block into squares, glued the square as L's, then glued the Ls together. Do the pictures below help? I honestly didn't document this one very well.
 

Attachments

  • IMG_2247.jpeg
    IMG_2247.jpeg
    651.4 KB · Views: 9
  • IMG_2246.jpeg
    IMG_2246.jpeg
    813.6 KB · Views: 9
Actually didn't use any jigs. I made a long block, which is the piece on top. I then cut that block into squares, glued the square as L's, then glued the Ls together. Do the pictures below help? I honestly didn't document this one very well.
excellent . I have some holly n walnut slatted blocks which have be3n looking for a project.

Thanks for the photos
 
Back
Top Bottom