Finishing with polyurethane

Signed-In Members Don't See This Ad
See more from rtjw

Status
Not open for further replies.

rtjw

Member
Joined
Feb 26, 2005
Messages
2,227
Location
Glen Rose, Texas, USA.
I finished this pen with polyurethane. first try with it and I dont think i like it too much. maybe i just dont know how to use it. will keep reading the finishing articles.


2005312133854_DSC00512.jpg
 
Signed-In Members Don't See This Ad

wayneis

Member
Joined
Mar 15, 2004
Messages
1,948
Location
Okemos, Michigan, USA.
I haven't tried the minwax but with Enduro I have not incountered any problems like that. Is your shop on the cold side? that could do it, I think if you look at the can it should give optimum temps for finishing with it.

Wayne
 

KKingery

Member
Joined
Nov 21, 2004
Messages
1,168
Location
De Pere, Wisconsin, USA.
What temp. was your shop when you applied it? That can affect curing times, etc.... I've used that product myself, and have had good results with it. You just have to be patient when applying it....almost just "misting" it - several times.
 

Gary

Member
Joined
Sep 10, 2004
Messages
1,371
Location
Texas, USA.
Glen Rose, TX isn't that cold. It was 82 degrees here in north Texas today. How are you applying the finish?
 
Status
Not open for further replies.
Top Bottom