Family Coin Rings

Signed-In Members Don't See This Ad
See more from Bob in SF

Bob in SF

Member
Joined
Feb 15, 2016
Messages
1,762
Location
San Francisco
It was a fun Thanksgiving.

My daughters asked for "some change" to go out for ice cream. I told them it would take a few hours. They left and returned to a set of family coin rings (wearable change).

Steps:
Punch a hole dead center through the coin.
Ream out the hole to smooth the edges.
Torch anneal to dull red, quench.
Form with a folding cone, using an arbor press.
Anneal, quench.
Form it into a cylinder and size it on a ring stretcher/reducer.
Curve edges if desired using an arbor press and dapping block.
File and sand the interior surfaces until they are very smooth and comfortable.
Adjust as necessary on the ring stretcher/reducer.
Patina as desired with liver of sulfur stopped with a baking soda rub.
Clean well with detergent.
Polish on a buffing wheel with jewelers rouge.
(Non-negotiable, not for sale, family use only, no fraudulent intent, violates no statutes; just a little family fun with a grateful measure of E Pluribus Unum)

attachment.php


The other family members would not pause their meal for a group photo.

Happy Saturday to all.

- Bob
 

Attachments

  • CoinRingSequence,FatherDaughter,2018,1200px.jpg
    CoinRingSequence,FatherDaughter,2018,1200px.jpg
    240.7 KB · Views: 819
Signed-In Members Don't See This Ad

Charlie_W

Member
Joined
Nov 16, 2011
Messages
5,918
Location
Sterling, VA USA
Bob, These are fantastic and beautifully done! I bet your daughters were surprised.....hope you all got some ice cream:wink:


I have seen the coin ring videos but haven't gotten around to making any.
Looks like fun.
 

Bob in SF

Member
Joined
Feb 15, 2016
Messages
1,762
Location
San Francisco
Many thanks for the kind words Charlie, Mike, Tony, Mark, Steve, Tom, and John!

Fun little project.

John - thanks - I'll check out Carl Fisher's work.

More fun ahead.

Gratefully, Bob
 

skiprat

Passed Away Mar 22, 2022
In Memoriam
Joined
Oct 19, 2006
Messages
7,812
Location
In a Skip in Wales
.......with a grateful measure of E Pluribus Unum)



- Bob

Well, I had to look that up :biggrin: Every day is a school day:wink:

Great fun to make aren't they? esp with friends or family !!:)

Carl Fisher (Fisher of Pens) uses these as center bands on some of his bespoke pens.

Do you know if he has got it past the proof of concept stage yet? I would like to know how he made the ring small enough for a centre band with standard available tooling. I made one, but actually struggled a bit to make it small enough. I had to make new tooling.
 
Joined
Aug 13, 2016
Messages
1,460
Location
Surprise, Arizona
Oh come on Bob! Is there ANYTHING you can't do? :) Seriously though, excellent job on those, I'm sure your daughters love them. I've seen a few vids on how they're made and it garnered my interest, although I'll probably never get around to making any myself.
 

Carl Fisher

Member
Joined
Jun 7, 2011
Messages
2,761
Location
Cape Coral, FL
.......with a grateful measure of E Pluribus Unum)



- Bob

Well, I had to look that up :biggrin: Every day is a school day:wink:

Great fun to make aren't they? esp with friends or family !!:)

Carl Fisher (Fisher of Pens) uses these as center bands on some of his bespoke pens.

Do you know if he has got it past the proof of concept stage yet? I would like to know how he made the ring small enough for a centre band with standard available tooling. I made one, but actually struggled a bit to make it small enough. I had to make new tooling.


Hey Steven. Yes I have the process nailed down and have pre-sold quite a few that I just have to find time to get done. Drop me an email and we can chat. I don't check in here all that often lately.
 
Top Bottom