Linarestribe
Member
Can the remaining Cactus juice be reused and if so how many times and how should it be stored?
Thanks
Jorge
Thanks
Jorge
Cactus juice use
- Thread starter Linarestribe
- Start date
Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
Monty
Group Buy Coordinator
Curtis says it can be reused until it's all gone or gets hard (if exposed to heat in a hot shop).
TomW
Member
He recommends storing used juice in mason jar, and do not keep it in the vacuum chamber overnight. I'm keeping mine (fresh and used) in the refrigerator, as a hot shop can cause the resin to gel up rendering it useless.
Tom
Tom
GregHight
Member
I'm not sure if Curtis ships the juice pre-activated or not but it is supposed to be used within 6 months of being activated. It isn't supposed to cure until hitting close to 200 degrees but smaller amounts may set at lower temps so if you keep it in a pressure pot just keep a quart or more in there. I use the same stuff Curtis does,(I think) and I don't have any issues but I often have a gallon plus in my pot at all times.
Unless you have an all metal shop in the sun, I wouldn't worry about refridgerating it.
Unless you have an all metal shop in the sun, I wouldn't worry about refridgerating it.
MesquiteMan
Retired Head Moderator
Yes, the excess juice can be re-used. If you are using it clear, simply pour it into some type of plastic container. Eventually, the clear will start to darken from the wood contaminants which is a good time to turn it into dyed juice. Your shelf life will be extended significantly if you refrigerate it and it WILL gel up in a hot shop. I have 2 gallons that were packaged and ready to ship right before my father died. I did not get them out and since I knew I would not be in the shop, I turned off my AC. A month later when I was ready to ship, it had turned into a nice, expensive doorstop.
penhead
Local Chapter Leader
Oh cr*p....I stabilized some blanks about a month ago...took the blanks out of the juice and the pump is off...but I just realized that I didn't take the leftover juice out of the chamber...
...umm, when I get home tonight, how much of a big problem am I going to be facing ;(
...umm, when I get home tonight, how much of a big problem am I going to be facing ;(
wolftat
Product Reviews Manager
You may have found a new use for a spring actuated center punch.
Constant Laubscher
Member
penhead
Local Chapter Leader
That's not funny...ok maybe a little ;(
JustKidding...gee, wonder if it's hard enough I can cut it up into pen blanks 8>)
JustKidding...gee, wonder if it's hard enough I can cut it up into pen blanks 8>)
wolftat
Product Reviews Manager
Wasn't really meant to be funny , I have been using one for over a year to clean my pots and knock hardened resins off my bench, it really does work but be carefull with the non metal containers. It may be hard enough to use as pen blanks, but remember to paint the insides of the blanks.
penhead
Local Chapter Leader
Thanks Wolftat, I will keep that tip in mind.
I haven't done that much casting or stabilizing yet, most of my workbench is covered with yellow glue squeeze out 'cause majority of what i do is segmented work.
Thanks again..!
I haven't done that much casting or stabilizing yet, most of my workbench is covered with yellow glue squeeze out 'cause majority of what i do is segmented work.
Thanks again..!
Linarestribe
Member
Thanks for all the replies. Here in the Northwest, it's barely reached 80 a few times. The weather man has been counting in minutes above 80. I think we are around 200 while the rest of the nation fries.
Glad to hear it can be saved. Now to return the none working vacuum pump and get a better one.
Thanks
Jorge
Glad to hear it can be saved. Now to return the none working vacuum pump and get a better one.
Thanks
Jorge