Butterly Label Pens

Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
Yeah, thats what I've been researching thinking I'll try. I have a client requesting 2 dozen with butterflies & I think the lazer kits will be "sticker Shock" for them!

Thanks for the info!
 
try michaels for some colorful butterfly stickers. they work great. just turn your wood a slight bit undersized and cover with plenty of CA.
 
I've not seen such a thing . However, I have used a decal ...www.lazertran.com. I've used this in two ways first on a turned wooden blank then finnished in ployurethane lacquer worked fine mine was a portrait photograph. Second was by painting a tube with acrylic then applying the decal to the painted tube prior to it being caste in resin this is work in progressso not yet sure how successful it will be
 
164440_132072383519502_100001502242963_190901_4469848_n.jpg


166583_133870023339738_100001502242963_200029_4340661_n.jpg


162651_132263513500389_100001502242963_191347_3882575_n.jpg


These are just a few that have been done with stickers. Hobby Lobby out here has a good selection of butterfly stickers. Buy the ones on the softer clear plastic with the clear border. Turn your pens so the barrel doesn't have any bulge in it. Apply 3 or 4 layers of thin CA. This will prevent a light colored halo around the sticker. Then, get coats of medium on over the top of the sticker. This will be tricky as your paper towel or whatever you use will try to grab the edges and ruin it. Get a good many coats on and then you can sand it and polish. I usually have a little raised surface over the sticker, but it's not too offensive. Some of the really thin stickers and dry transfers can easily solve that.
 
Back
Top Bottom