watch_art
Member
After the $50 rebate from Delta my total comes to 903.
Am I being realistic or are some of the items on my list a joke?
Thanks!
Delta lathe!!! 600 w/ 50 mail in rebate
http://www.amazon.com/gp/product/B00309ZZRQ/ref=ox_sc_act_image_3?ie=UTF8&m=ATVPDKIKX0DER
center drills 7
http://www.amazon.com/HSCD-10-Double-Center-Spiral-Flutes/dp/B002GV2RAC/ref=pd_sbs_indust_6
drill bits 40 - or should I get individual bits of sizes that I'll use most often, like the taps?
That's what I'm thinking. Any suggestions?
http://www.harborfreight.com/115-piece-high-speed-drill-bit-set-with-index-528.html
drill chuck 32
http://www.amazon.com/PSI-Woodworking-Products-TM32-Diameter/dp/B004CVJC20/ref=pd_cart_recs1
Live center - 16
http://www.amazon.com/gp/product/B000KIEPSA/ref=ox_sc_act_image_2?ie=UTF8&m=ATVPDKIKX0DER
taps and dies from roginsf on ebay - 68
http://stores.ebay.com/northbaycuttingtools
four jaw chuck - 90
http://www.pennstateind.com/store/CUG3418CCX.html
a good friend recommended this one - 220
but will i really benefit??
http://www.pennstateind.com/store/CSC3000CTN.html
but what about this chuck? 80
http://www.pennstateind.com/store/CSCPENCHK.html
die holder - 10
http://www.wttool.com/index/page/pr...tegory_id/14647/product_name/Die+Holders+(WT)
collet and chuck set 90
http://www.pennstateind.com/store/LCDOWEL.html
extra collets - which of these might I need? 9 each
http://www.discount-tools.com/er32-collets.cfm
and a steady rest - 40
should I get one?
http://www.grizzly.com/products/Steady-Rest-With-Ball-Bearing-Guides/H5569
Am I being realistic or are some of the items on my list a joke?
Thanks!
Delta lathe!!! 600 w/ 50 mail in rebate
http://www.amazon.com/gp/product/B00309ZZRQ/ref=ox_sc_act_image_3?ie=UTF8&m=ATVPDKIKX0DER
center drills 7
http://www.amazon.com/HSCD-10-Double-Center-Spiral-Flutes/dp/B002GV2RAC/ref=pd_sbs_indust_6
drill bits 40 - or should I get individual bits of sizes that I'll use most often, like the taps?
That's what I'm thinking. Any suggestions?
http://www.harborfreight.com/115-piece-high-speed-drill-bit-set-with-index-528.html
drill chuck 32
http://www.amazon.com/PSI-Woodworking-Products-TM32-Diameter/dp/B004CVJC20/ref=pd_cart_recs1
Live center - 16
http://www.amazon.com/gp/product/B000KIEPSA/ref=ox_sc_act_image_2?ie=UTF8&m=ATVPDKIKX0DER
taps and dies from roginsf on ebay - 68
http://stores.ebay.com/northbaycuttingtools
four jaw chuck - 90
http://www.pennstateind.com/store/CUG3418CCX.html
a good friend recommended this one - 220
but will i really benefit??
http://www.pennstateind.com/store/CSC3000CTN.html
but what about this chuck? 80
http://www.pennstateind.com/store/CSCPENCHK.html
die holder - 10
http://www.wttool.com/index/page/pr...tegory_id/14647/product_name/Die+Holders+(WT)
collet and chuck set 90
http://www.pennstateind.com/store/LCDOWEL.html
extra collets - which of these might I need? 9 each
http://www.discount-tools.com/er32-collets.cfm
and a steady rest - 40
should I get one?
http://www.grizzly.com/products/Steady-Rest-With-Ball-Bearing-Guides/H5569