Effects of bleach on wenge

Signed-In Members Don't See This Ad
Wmcullen

Wmcullen

Member
Joined
Dec 1, 2020
Messages
401
Location
Fairfax, Virginia
I placed wenge in bleach for different amounts of time to see how quickly it would lighten.
My results indicate I can get away with as little as 10 minutes for pretty good results.
1.jpg

Avg Color obtained using "Photoshop->Blur->Average" filter. Lightness determined using CIELab color space.
2.jpg

2.jpg

x-axis indicated minutes exposure. Results flattened out quickly; especially beyond 2 hours.
- Cullen
 

Attachments

  • 2.jpg
    2.jpg
    53.6 KB · Views: 450
Signed-In Members Don't See This Ad
Wmcullen said:
I placed wenge in bleach for different amounts of time to see how quickly it would lighten.
My results indicate I can get away with as little as 10 minutes for pretty good results.
View attachment 357785
Avg Color obtained using "Photoshop->Blur->Average" filter. Lightness determined using CIELab color space.
View attachment 357791
View attachment 357774
x-axis indicated minutes exposure. Results flattened out quickly; especially beyond 2 hours.
- Cullen
Click to expand...
Very interesting. I've been soaking mine 15-30 min and that's about all that's needed. Good to know. What type of bleach did you use for the test? I always use household (chlorine) bleach but I wonder if a different type would give different results.
 
I sort of accidentally ran into the one -vs- two applications. I made one knife handle, with one bleaching, second from right. Then I made a set, and the bleaching came out blotchy, so I did a second application. Both were whatever the bleach recommended (10 minutes?). I found the double bleaching to be significantly lighter. The knives are held to the stand magnetically, and the stand is wenge with one or two coats of oil. The handles finished with General Finishes waterbased poly.
20210331_184134.jpg
 
Thank you SO much for this. I have been meaning to do something like it. I was thinking of how I could color the next one just within the last few hours and I definitely want it lighter for dyeing. Personally, I think this should go into the IAP resources for reference.
 
RDHals said:
What type of bleach did you use for the test? I always use household (chlorine) bleach but I wonder if a different type would give different results.
Click to expand...
Great question. I should have added this info. I used cheap dollar store bleach.
1.jpg

I'm fascinated with the effects of double treatment and will try that too.
I really appreciate the thoughts and comments.
- Cullen
 
Wmcullen said:
I placed wenge in bleach for different amounts of time to see how quickly it would lighten.
My results indicate I can get away with as little as 10 minutes for pretty good results.
View attachment 357785
Avg Color obtained using "Photoshop->Blur->Average" filter. Lightness determined using CIELab color space.
View attachment 357791
View attachment 357774
x-axis indicated minutes exposure. Results flattened out quickly; especially beyond 2 hours.
- Cullen
Click to expand...
i love your scientific approach!!thanks for sharing.
 
derekdd said:
I might have asked already, but do you sand after bleaching or go straight to finishing?
Click to expand...
In my experience bleaching is very rough on the wood making it "fuzzy" and a little bloated… so sanding is very necessary. My process (which I've only done 4 times so please chime in if there's a better approach) is to sand down to about 320 grit before bleaching; then afterwards hit it with 320 again and progress all the way to your final grit and finish. The pen does darken a bit depending on how much you sand off.
 
Wmcullen said:
In my experience bleaching is very rough on the wood making it "fuzzy" and a little bloated… so sanding is very necessary. My process (which I've only done 4 times so please chime in if there's a better approach) is to sand down to about 320 grit before bleaching; then afterwards hit it with 320 again and progress all the way to your final grit and finish. The pen does darken a bit depending on how much you sand off.
Click to expand...
I figured bleaching would raise the grain a bit.

Good information, thanks.
 
You must log in or register to reply here.
Back
Top Bottom