penbros
Member
Well, I would show you but i cant post a picture. Its a 9' by 11' bedroom that used to be a storage room. Its half shop and half storage room but were moveing everything out. So, the shop is slowly taking over. Its really messy too. My lathe is 36" but takes up about 5 feet of the south 8 foot wall. On the 11 foot west wall I have two four foot workbenches centered between the north and south wall. I have a 16" scroll saw and a 9" drill press on the north bench. Ive got wood storage between the north wall and the north bench. I have a 4" disk /belt sander thats on the floor right now. Ive got all those little hand tools. and a small black and decker table saw in the middle of the room that will be replace by a slightly larger jet table saw and the black and decker will be the crosscut saw, the jet will be all other: tenoning ripping mitering etc. hope you get a good picture of my shop. please post a picture of your shop!