Vise Survey

Signed-In Members Don't See This Ad
Status
Not open for further replies.
Paul in OKC

Paul in OKC

Member
Joined
Jul 26, 2004
Messages
3,113
Location
Oklahoma City, OK, USA.
Hi all. Actually, vise life survey. I would like to hear from those that have purchased one of my vises, either style. I would like to know how they are holding up over the long haul. I have not recieved much in the way of long term feed back, so that's what I'm looking for. I know of one vise that has had some issues, and one of the first 'Side-Vise' I sold around 4 years ago to be working well being used regularly by a turning group. So let me have it, especially if you have had a problem. I want to be able to take care of the product to insure a long life for the user.
Thanks
 
Signed-In Members Don't See This Ad
Paul,

Mine is so new...I can't give any input.

However, I would like to to commend you for a great product and for thinking of these "minor" things to possibly improve the quality even further. Good luck finding one flaw though [;)].
 
Paul - I got mine a year and 4 months ago if memory serves me. It drills true, just as it did day one. I do clean it regularly and lube the moving parts. I still say I'd give up my 1014-VS before I'd give up my PHDesigns SideVise![8D]
 
I hope this doesn't void my unconditional lifetime warranty, but I have done nothing to mine except remove the pile of chips that cover it every now & then, works just like new. I believe I had mine over a year now.
 
Originally posted by PenWorks
<br />I hope this doesn't void my unconditional lifetime warranty, but I have done nothing to mine except remove the pile of chips that cover it every now & then, works just like new. I believe I had mine over a year now.
Click to expand...

Sorry Anthony, but covering with chips does void the warranty [:D]

The one thing I would stress is that a little lube where the threads meet the angle supports is the one thing I'd say is the best thing.
 
Had mine since the summer of 2004 and it still looks great and works great. Does my lifetime warranty cover a tangle with a drill press bit? It looks so nice, I can't stand to see the couple of nicks gone from the left jaw. Stupid me. Thanks Paul for a great tool. I've given all of my others(WC, PSI, HUT, etc) away to new penturners and told them who to call when they are fed up with their performance.
Do a good turn daily!
Don

quote]Originally posted by Paul in OKC
<br />Hi all. Actually, vise life survey. I would like to hear from those that have purchased one of my vises, either style. I would like to know how they are holding up over the long haul. I have not recieved much in the way of long term feed back, so that's what I'm looking for. I know of one vise that has had some issues, and one of the first 'Side-Vise' I sold around 4 years ago to be working well being used regularly by a turning group. So let me have it, especially if you have had a problem. I want to be able to take care of the product to insure a long life for the user.
Thanks

[/quote]
 
Originally posted by Paul in OKC
<br />[quote
Sorry Anthony, but covering with chips does void the warranty [:D]
Click to expand...

I use the self lubricating chips, so I should be fine [:D]

At least I know not to drill thought the aluminum like some others around here don't [B)]
 
I've had mine just a few mos and mebe onl 100 pens or so but there is absolutely no sign of waer at all. My son has used it for about 30 pens if it survived him it probably cannot be hurt at all. The side load capability is really great. I gave the woodcrap vise away. Probably cost me a friend.[:D] If you don't have on of Paul's vises get one.
Jim
 
Paul,

With all these positive posts on your vice, you have got my curiosity stirred. Where can I see or find out more about this great sounding product?
 
Paul, I haven't had mine very long at all, but I regard it as one of the best purchases I have made. Once I made a very simple base for it, my drilling improved beyond measure.

For those of you on Paul's waiting list, the vise is worth the wait, trust me.
 
Best investment for my shop I ever made! Still working like a champ.
I hope Paul doesn't mind but here is a picture of one for everyone that hasn't seen it.

vise1.jpg
 
Paul your vise is great, I think I took the woodcraft one out for a day of fun and target practice. [:D]

My only question after seeing another, is that the "rod" leading out to the handle does not seem as long as the one in Ron's picture. I have to manipulate the vise a little to make sure I have room to turn it. Maybe a better example is the top right screw hole is inaccessable due to the handle being over it. Still I would not use any other vise I have seen.
 
Originally posted by airrat
<br />Paul your vise is great, I think I took the woodcraft one out for a day of fun and target practice. [:D]

My only question after seeing another, is that the "rod" leading out to the handle does not seem as long as the one in Ron's picture. I have to manipulate the vise a little to make sure I have room to turn it. Maybe a better example is the top right screw hole is inaccessable due to the handle being over it. Still I would not use any other vise I have seen.
Click to expand...

I have gotten that comment before, and have made a slight change. The newest ones have a slightly longer handle shaft.
 
Well Paul;

You rember my writeup last year. I brought my vise into work today and checked it again after putting 300 plus blanks through it and I have to say that the accuracy has not changed hardly at all. I agree with Lou; If I had to choose between the lathe and the vise my lathe would lose.
 
I too have only had my Paul Huffman vice for a few months. I also own the Penn State drilling vice and I used to own the Craft Supplies vice. The Craft Supplies vice lasted about a week before it stopped working properly, I probably stripped the plastic threads when tightening it. Once this tool quit working after the first week I sent it back to CUSA.

I then ordered the Penn State vice which was a vast improvement over the CUSA vice. The Penn State vice is supposedly the best rated commercially produced drilling vice (at least that’s what it says in their printed materials) For those who may be unfamiliar with the Penn State vice here is a link to their website http://www.pennstateind.com/store/drillcent3.html This vice served me well for over a year and still works. I had been reading past post and reviews of Paul’s design and was intrigued by the “assumed precision†and the ease of access to the blank.

I got on the waiting list and waited for what seemed like forever. I must agree with the others that have posted to this thread. The workmanship and precision of this vice puts the Pen State vice to shame, and again before owing the Paul Huffman vice I thought Penn State Vice was a very good tool. For those on the waiting list; it’s well worth the wait. For those who don’t want a Paul Huffman vice or for those who don’t want to spend quite that much for a drilling vice, I have a mint condition Penn State vice for sale #61514;

I have also attached a photo of my setup; I went about it a bit different than some of the others. There are more pic’s of my setup as well as other and quite a bit of discussion on the vice in an older thread at. http://www.penturners.org/forum/topic.asp?TOPIC_ID=12265


200641217014_drilling%20vice%202%20web.jpg
 
Thanks for the input and kind words. My goal is to build a quality product that will last, hopefully a lifetime or at least close[:)]. It is good to know that there have been very few if any (well, one) issues. I want to be able to improve where needed.
I do apreciate the patience of my customers and am trying to get better at keeping parts in stock to assemble, just can't get the shop making them to scoot mine in on my time frame [:D].
Thanks again.

(Still looking for the local elves shop!)
 
Paul,

From what I have seen and heard about this vice, I think I need to ask to be put on your list as well.

Let me know if you need a deposit or vial of blood or something to hold me a position. Looks like one of those just gotta have's. I hate the piece of junk I am currently using and I believe your version will solve the reasons of my hate [:D]

Blessings on ya.....
 
I see this post was started over a year ago, but I just had to say I recently received my vise from Paul. I couldn't be happier with it's appearance and function. Since using it I have not a single drill bit wander or even one blank chip out on the end. This wasn't a major problem before, but it usually reared it's ugly head when I was drilling a particularly beautiful piece of wood. Now I drill with complete confidence. Paul's craftmanship in designing and producing my vise is head and shoulders above anything I've seen in metal working. Thank you Paul. [8D]
 
I love mine. I have one of the older PSI vises, and it wound up getting cross threaded and having other "issues" within only a few months (wich, at the rate I turn pens, means only after a few pens). Paul's vise is much more solid, and I don't expect to have the same problems. My only gripe is that the cast handle is a little too long, and there isn't much clearance if you mount the vise flat on a board. The vise still works great, you just have to pay attention to how you operate the handle. In case it wasn't clear, this is a MINOR gripe, especially when you consider that JB_Pratt's solution should work well to overcome the problem (note to self...go implement this solution!).
 
Okay, it's been about 8 months now and it gets a workout almost daily. I just wish I hadn't waited so long to get on the list. And the only complaint I have is mentioned by Jim above. To get around it, I simply cut a board the width of the vise and mounted it to another. Problem solved.[;)]
 
Originally posted by JimGo
<br />I love mine. I have one of the older PSI vises, and it wound up getting cross threaded and having other "issues" within only a few months (wich, at the rate I turn pens, means only after a few pens). Paul's vise is much more solid, and I don't expect to have the same problems. My only gripe is that the cast handle is a little too long, and there isn't much clearance if you mount the vise flat on a board. The vise still works great, you just have to pay attention to how you operate the handle. In case it wasn't clear, this is a MINOR gripe, especially when you consider that JB_Pratt's solution should work well to overcome the problem (note to self...go implement this solution!).
Click to expand...
I will forward this to the complaint department[:D]. Thanks for the kind words. the handle issue is the one thing I get feed back on the most. the only way to avoid this would be to make the vise taller. I originally made my handles, but that was very time consuming. I have been looking into this lately, but there are little choices seemingly available to the average guy to find, especially with out designing around the handle style! I also wanted to have a handle length that made the vise easy to operate. I guess I will start putting one of those little safety stickers on it that shows a pinching hazard[:D][:D]
I do appreciate the patience of all. I am expecting parts delivery in about 30 days, then I will teach my wife and children to assemble.[;)]
Thanks.
 
Well...it seems that everybody is unanimous about this one ! Just two questions: How much is it ? And everybody is talking about the delay for getting one: How soon can we get one ? I included pictures of my current setup. With that vise you can center a blank in about two seconds flat and everything is mounted on a board so that it can be removed and replaced by a standard fence with a stop block. There is also a dust port integrated into the table. I guess that after all this I will have to change the PSI vise that is on top !!!

So please answer my two questions... Thanks, Ben

2006816221311_Essai%20003.jpg
<br />


2006816221456_Essai%20004.jpg
<br />

2006816221552_Essai%20005.jpg
<br />
 
Paul I love my vise and would not take any amount of money for it! My wife loves it as much as I do. I clean mine regularly and an occasional lube job, then dirty it up again with more wood chips. I purchased mine early this year or latst year, I can't remember, anyway it is perfect!
 
Let me tell you about my vise it is due to be born soon and I have promised to love and raise it with tender loving care and feed it some great blanks every day or so to keep it happy. As I live about 30 miles from the hospital in Oklahoma City where it will be born I have arranged for a police escort as soon as it arrives into this world and have a rear faceing baby vise seat in the van to bring it home in. AS YOU CAN TELL PAUL I'M READY TO BECOME A NEW VISE DADDY!!
 
Originally posted by OKLAHOMAN
<br />Let me tell you about my vise it is due to be born soon and I have promised to love and raise it with tender loving care and feed it some great blanks every day or so to keep it happy. As I live about 30 miles from the hospital in Oklahoma City where it will be born I have arranged for a police escort as soon as it arrives into this world and have a rear faceing baby vise seat in the van to bring it home in. AS YOU CAN TELL PAUL I'M READY TO BECOME A NEW VISE DADDY!!
Click to expand...

LOL, there Roy. Now that you are retired, you should have the time to be in the delivery room. You could catch it when it comes out!![:D]
 
Signed-In Members Don't See This Ad
Very good tactics Roy. I think groppling, begging, flatery, send choclolates....
All have a way of moving your name up on the list [:D] [}:)] [:D]
 
Status
Not open for further replies.
Back
Top Bottom