I guess I'm as close to an expert as we have on the site, so here goes. TSW is meant to be wiped on, wait 45 seconds (or a little longer), then wipe the excess off. It can be hand or power buffed right away. You can buff it to a simple satin finish or stay with it a few more seconds and take it to a high gloss. Make sure however you buff it that the material is clean.
Also, for those who haven't tried it, you can use it to build coats by allowing an hour or two between coats. If you build several coats, wait overnight (at least) before assembling your pen. It does need to cure and the more coats you put on the longer the cure takes. FYI, White diamond will simply take it off.
And Tom, POC should have their re-supply by about Wendesday. Thanks for your patience.
Also, for those who haven't tried it, you can use it to build coats by allowing an hour or two between coats. If you build several coats, wait overnight (at least) before assembling your pen. It does need to cure and the more coats you put on the longer the cure takes. FYI, White diamond will simply take it off.
And Tom, POC should have their re-supply by about Wendesday. Thanks for your patience.