crabcreekind
Member
I picked up a virage kit from woodcraft. I thought it might be finial twist. But i wasnt sure and I had never made one before. I like the kit. The twist is smooth, and it doesnt unscrew very easy, which is good for the user. I found this flaw in twist sierras. That is why i stopped buying them. I believe I cut the cut too short when trimming. So the brass piece showed at the bottom when i pushed it together. So i solved this by taking a sharpie and coloring the brass. There is still a gap there. But it not ugly and noticeable because of the brass not showing through.