Think I could cut blanks on this?

[OKLAHOMAN]

:biggrin:http://oklahomacity.craigslist.org/tls/1077292202.html

 

[papaturner]

With a sharp blade and take your time I think it might work.:biggrin:

 

[Woodlvr]

Roy is this a tool gloat?:biggrin:

 

[spiritwoodturner]

What is that, a Grizzly? Boy, is this post timely...

I need to get my Jet set up to cut my blanks.

Dale

 

[OKLAHOMAN]

Mike, for those that have seen my shop, They know I would have to raise the ceiling and stretch the walls :biggrin:to get that beast in, for now I will have to accept that my Crapsman.:frown:

Roy is this a tool gloat?:biggrin:

 

[marcruby]

Sheesh! All that power and only a 12" cutting height. What a waste for resawing.

Marc

 

[OKLAHOMAN]

Marc, it said 24" bandsaw on the title!

Sheesh! All that power and only a 12" cutting height. What a waste for resawing.

Marc

 

[hewunch]

you have 3 phase in your garage?!?

 

[tim self]

Roy, I think you should get it. But you may need to get a larger building to put it in!

 

[woodman928]

yeah it would!!!! even with the blade on backward :biggrin:

Jay

 

[wb7whi]

14 inches from the blade to the left hand post. if you buy it you can store it up here in spokane until you have some room for it down there. be happy to do it.

 

[ngeb528]

You might be able to, but I think the price is a little too much. We just bought a 12" for $75, so the 24" should be $150, don't ya think? Or we could sell you ours for half the price yours is listing for. Want to make a deal??

Nancy

 

[MesquiteMan]

Marc, it said 24" bandsaw on the title!

Roy,

Remember, the size of the saw in inches is the throat or basically the maximum length you can cut to the left of the blade without hitting the frame. It has nothing to do with the resaw capacity.

I have an 18" Rikon and it will not resaw 18". Maybe you already know this and your post was tongue in cheek? If not, now you do!!

 

[marcruby]

The power it draws would probably ruin your pen blank carbon footprint. >

Marc

Marc, it said 24" bandsaw on the title!

 

[wdcav1952]

So, Roy, are you planning to do a bit of intricate segmenting?

 

[Darley]

Nice toy Roy, 5hp whooooooo!! that cool you can cut lots of blanks, but 3 ph that not good for your electricity bill :biggrin:

 

[rej19]

If that one won't do the job maybe this one will.
http://indianapolis.craigslist.org/tls/1080407923.html