The reasons I like using the stabilized woods are numerous. (1) Dust control is better when turning, (2) the wood is completely protected from the elements, (3) Most burls are simply enhanced in beauty, (4) Difficult woods are easier/safer to turn, (5) Finishes are better and easier to apply, (6) the wood is somewhat more insensitive to changes in the temperature and or climate, (7) the appearance of the wood can be changed by selective dying, (8) people ask what it was treated with (increases their interest), (9) Shrinking, cracking, expanding, warping are basicaly eliminated, (10) oily hands do not damage the wood, (11) the grain is not raised and finishing time is greatly reduced, etc.
Try lookingat some of the luthier woods that have been treated professionally and you will see the results of the stabilization processes. Check these knife scales examples and look at the other woods at this site
http://www.galleryhardwoods.com/knifehandle.htm (Notice the filled in grain of the examples)
Hope this helps you some ... [
]