GABJR
Member
when using a pen mill to square up the blank ends, what is the proper speed setting for this operation
Originally posted by GABJR
<br />when using a pen mill to square up the blank ends, what is the proper speed setting for this operation
You must have a heck of a DP if you can drill that plumb in reference to the outside of the blank.Originally posted by RonSchmitt
<br />I have the Penn State blank cutting jig, it is slightly modified and mounted semi-permanently to my chop saw. I have not had to mill the ends of a blank ince setting it up. Not a bad little jig for the price.
Originally posted by Paul in OKC
<br />Cordless drill for me. Hold the blanks in hand modt of the time. Sometimes put them loosely in a vise.
Well, great minds do think alike, don't they say[]Originally posted by wdcav1952
<br />Originally posted by Paul in OKC
<br />Cordless drill for me. Hold the blanks in hand modt of the time. Sometimes put them loosely in a vise.
Dang, Paul, looks like I am in good company if I use the same method you use! []
Originally posted by Paul in OKC
<br />Cordless drill for me. Hold the blanks in hand modt of the time. Sometimes put them loosely in a vise.