BluesFan
Member
I decided to save some money and bought a 2x2x24 of yellowheart and bloodwood.
I cut off one end and sawed it into blanks.
Now the problem. After several days I start seeing splits in the thin parts.
I have no idea of the moisture content of the wood but the ends were sealed.
I am finishing by danding through 12000MM and then a couple of coats of Mylands Friction Polish and some BriWax.
Any ideas?
Thanks
I cut off one end and sawed it into blanks.
Now the problem. After several days I start seeing splits in the thin parts.
I have no idea of the moisture content of the wood but the ends were sealed.
I am finishing by danding through 12000MM and then a couple of coats of Mylands Friction Polish and some BriWax.
Any ideas?
Thanks