MIKL
Member
i picked up some more bottle tops, in the mix was a Southern Comfort Cap, and a different Jim Beam Cap, these have added well to the collection
i also found an old Beer bottle top and thought i would try that, i had to make it thicker than the others and thought that i may run in to trouble turning it down...it sits about 1.5mm proud of the brass tube
i need to come up with a new plan to cut these steel bottle tops down to size... wood turning tools just don't cut it:biggrin:
i took as far as i dared, i am happy with the shape although it is a little thicker than i normally like
i have added Wire and Aluminum Tape to the mix to give some added character
C&C Welcome
MIK
i also found an old Beer bottle top and thought i would try that, i had to make it thicker than the others and thought that i may run in to trouble turning it down...it sits about 1.5mm proud of the brass tube
i need to come up with a new plan to cut these steel bottle tops down to size... wood turning tools just don't cut it:biggrin:
i took as far as i dared, i am happy with the shape although it is a little thicker than i normally like
i have added Wire and Aluminum Tape to the mix to give some added character
C&C Welcome
MIK