Hunter1787
Member
Hi there. Here are some pictures of pens that I have made at various times over the past several months. The tru-stone was full of surprises. I had heard all of the stories about how hard tru-stone was to turn so when I started on the turquoise I was very ready to spend two or three hours on it. It turned really quickly. I spent about 30 minutes turning it (I timed myself). Well, I was feeling pretty good about tru-stone so I went ahead and started turning the black/gold web one. OUCH. Every three passes I had to resharpen my chisel and I am not kidding. I ended up just using 220 grit sandpaper glued to my table and I would take four swipes on each bevel and then go back to turning. I didn't spend nearly as much time turning as I did sharpening. But then again the results are absolutely amazing. I really like a lot of the acrylic acetate blanks but I do think that the tru-stone blanks are worth the extra effort.
Comments, criticism, etc, are all welcome.
John
Comments, criticism, etc, are all welcome.
John
Attachments
-
IMG_4203.jpg18.1 KB · Views: 166
-
IMG_4200.jpg25.8 KB · Views: 118
-
IMG_4206.jpg19.7 KB · Views: 100
-
IMG_4183.jpg31.6 KB · Views: 186
-
IMG_4185.jpg21.8 KB · Views: 140
-
IMG_3788.jpg11 KB · Views: 155
-
IMG_3790.jpg11.2 KB · Views: 119
-
IMG_3791.jpg12.2 KB · Views: 133
-
IMG_3794.jpg12.5 KB · Views: 128
-
IMG_3795.jpg13 KB · Views: 121
-
IMG_3797.jpg10.9 KB · Views: 119
-
IMG_3801.jpg11.9 KB · Views: 128
-
IMG_3802.jpg11.3 KB · Views: 115
-
IMG_3800.jpg10.9 KB · Views: 108
-
IMG_4215.jpg20.9 KB · Views: 217