TellicoTurning
Member
Has anyone used the solid bar tool rests offered by PSI... I was turning a bowl this afternoon from Zebrawood and had a bad catch.. not only launched the bowl around the shop, also snapped the post off my tool rest.
Solid Bar Tool Rests
- Thread starter TellicoTurning
- Start date
Signed-In Members Don't See This Ad
- Status
Signed-In Members Don't See This Ad
jjenk02
Member
Did you put a new crease in your pants[
]
]
TellicoTurning
Member
I'll garuntee you I learned to duck and cover today.
chigdon
Member
Now THAT is a CATCH! The story could have ended a lot worse.
jjenk02
Member
What tool were you using when you had the catch[?]
TellicoTurning
Member
A brand new bowl gouge. I had just touched the insde of a shallow bowl and BAM!
woodmarc
Member
I have a set of those. Pretty light weight. Haven't broken one though.
They are <b>R E A L </b> easy to dent and ding. IMHO not worth the money.
I bought some of the round bar rests from Rockler. Those are nice.
my 2 cents worth
They are <b>R E A L </b> easy to dent and ding. IMHO not worth the money.
I bought some of the round bar rests from Rockler. Those are nice.
my 2 cents worth
opfoto
Member
There was a member here that offered them up a while ago. Nicely made, reasonable prices. I think it was Lamar Sherrill? He goes by SWOODWRKNG, you may be able to email him. Take care. Glad you weren't hurt.
Zebra wood really is not "user friendly" but very "striking"[]
]Dario
Member
What size bowl?
Is it near final thickness or still rough?
What HP does your lathe have.
How are you holding (chuck/FP) the bowl?
Are you sure the tool was resting on the tool rest before it contact the wood? Most "accidents" of this nature are caused by such error and just wondering.
TellicoTurning
Member
The bowl is about 8" dia.. I was chucking in a scroll chuck. I was turning on the Jet Mini.. 1/2 horse motor and fortunately, I could put it back in the chuck and transferred to my other lathe... it's near finished.. just need to cut the tenon off the bottom. I made a jig to hold the bowl so I could cut the tenon off another bowl, but the jig is just a hair small for this bowl.. have to cut another jig.
Marc, I was totally surprise when that 5/8" cast iron post snap... I was busy dodging the bowl that was flying around the shop, so didn't see it until I found the bowl.
I've had to run the edge through a grinder to smooth the dings... I order the set from PSI.. I miss my Jet lathe.
Marc, I was totally surprise when that 5/8" cast iron post snap... I was busy dodging the bowl that was flying around the shop, so didn't see it until I found the bowl.
I've had to run the edge through a grinder to smooth the dings... I order the set from PSI.. I miss my Jet lathe.
dubdrvrkev
Member
Not the first time I heard of a Mini rest snapping off. Best thing is none of the digits were in the way.
I just posted some links in another thread about tool rests for a mini.
I just posted some links in another thread about tool rests for a mini.
Rifleman1776
Member
That's what bowl gouges do. Works that way for me everytime too.
TellicoTurning
Member
It didn't beat me though.. switched to old lathe and got it finished.. except for the tenon on bottom, still working on a jig to take that off.
bob393
Member
That would nip the buttons off the seat.[
]
Glad to hear you weren't hurt.
]Glad to hear you weren't hurt.
- Status