toyotaman
Member
Where is a good place to buy bushings for the mandrel for the 7mm slimline pens? Mine are getting worn but I hate to pay $4.00 for 3 little bushings. There should be somewhere I can buy them in a larger quanity for a decent price.
Slimline bushings
- Thread starter toyotaman
- Start date
Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
keithlong
Member
Try Leroy at Smitty pen works.
ed4copies
Local Chapter Manager
toyotaman
Member
Does he have a web site or # ?
okiebugg
Member
pen bushings
Get onto Ebay and type pen bushings. I find them to be less expensive there.
Get onto Ebay and type pen bushings. I find them to be less expensive there.
Woodlvr
Member
You can PM him right here on the forum and probably get quicker results. Ed's idea is great also, if you need some corian to make yourself some bushings pm me with your address.
Last edited:
toyotaman
Member
Mike, I should be able to get some at my local Lowes or HD. If I cannot come up with any I will let you know. Thanks
sbell111
Member
Most any place that sells pen kits also sells the corresponding bushings. Shop around to get a good deal, but I likely wouldn't order just a set of slim bushings from somewhere because the cost of shipping is going to be pretty high, comparatively.
It's more efficient to include a set of bushings in an order when you restock kits. Personally, I like to have a few extra sets on hand at any time, just in case.
For instance, I sell bushings for three bucks. It will cost you two dollars to have them shipped to you if you just buy a set of bushings. If you buy kits, however, I ship via priority mail and you will have no additional shipping cost for the bushings. This saves you cash.
It's more efficient to include a set of bushings in an order when you restock kits. Personally, I like to have a few extra sets on hand at any time, just in case.
For instance, I sell bushings for three bucks. It will cost you two dollars to have them shipped to you if you just buy a set of bushings. If you buy kits, however, I ship via priority mail and you will have no additional shipping cost for the bushings. This saves you cash.
navycop
Member
You can get "free" corian at a countertop shop. They pretty much give away scraps.
David M
Member
i have used the flat center band , left over from slimline pens ......... have had a few from making casing pens .... cheep / left overs
Yes
www.smittyspenworks.com but if all you want is a set of bushings it would cost as much to ship them as I'd charge you for them.
toyotaman
Member
I need to find the right size pipe and cut it myself. Any idea what size to look for?
ed4copies
Local Chapter Manager
the mandrel will measure very close to 0.245"
crabcreekind
Member
Just buy a new mandrel, I bought a screw on mandrel it came with 7!!!
low_48
Member
Some suppliers will give you the bushings with enough kits, but $4 divided into 20 pens will only add 20 cents per pen. Pretty cheap tool.
papNal
Member
Thats a good idea!I have about 50 cb's that was just going to waste.They are soft so have to be careful but are definitely usable.Thanks John
Yes
Under my signature. I charge $3.00 if you buy just the bushings and $1.50 if you buy them with another purchase. Free shipping in either case.