Shop liquidation

Signed-In Members Don't See This Ad

gatornick

Member
Joined
Nov 28, 2007
Messages
117
Location
Omaha, NE
With the birth of two kids in the last couple years I cant remember the last time I turned a pen. So unfortunately everything must go. This is most of what I have left. I will post some turning tools, but I would like to get them sharpened up first. All prices are plus flat rate shipping. I will stuff whatever you choose in as small of a box as possible. Payment by Paypal. May be shipped with blanks that I am listing separately.

Ill start off with some good starter kits. Most drill bits and bushings are used, but good for a cheap starter set.
Sold - First one is slim parts. Includes all you see plus 3 drill bits, 1 drill bits is new/2used $12
Sold - Cigar parts includes the 2 drill bits shown in other photo. $12
Sold - Sierra includes sierra and sierra vista bushings and drill bit in other photo. $12
Sold - refills $4
Sold - JR Gent $12
Calipers and center finder - old, but work as they should $12
Sold - JR Gent closed end mandrel for lower barrel. Like new only used 3 times. $18
basic mandrel - Free to beginner
Sold - Micromesh - was a 3x6" sheet set of 7. 2 of the three strip sets are unused. $6
Sold - various trimmers - 3 of the heads are unused $40
Sold - Live center - Only used with Johnny CNC bushings.$15
Pen rack - No finish on it, may need some final sanding then ready for your finish. Made of birds eye and curly maple -$10
 

Attachments

  • DSC_0804 (800x531).jpg
    DSC_0804 (800x531).jpg
    146.4 KB · Views: 156
  • DSC_0807 (800x531).jpg
    DSC_0807 (800x531).jpg
    154.8 KB · Views: 129
  • DSC_0808 (800x531).jpg
    DSC_0808 (800x531).jpg
    117.7 KB · Views: 111
  • DSC_0809 (800x531).jpg
    DSC_0809 (800x531).jpg
    130 KB · Views: 115
  • DSC_0810 (800x531).jpg
    DSC_0810 (800x531).jpg
    120.2 KB · Views: 114
  • DSC_0812 (800x531).jpg
    DSC_0812 (800x531).jpg
    114.5 KB · Views: 120
  • DSC_0813 (800x531).jpg
    DSC_0813 (800x531).jpg
    108.7 KB · Views: 127
  • DSC_0817 (800x531).jpg
    DSC_0817 (800x531).jpg
    123.5 KB · Views: 184
  • DSC_0818 (800x531).jpg
    DSC_0818 (800x531).jpg
    123.7 KB · Views: 164
  • DSC_0819 (800x531).jpg
    DSC_0819 (800x531).jpg
    158.3 KB · Views: 156
  • DSC_0820 (800x531).jpg
    DSC_0820 (800x531).jpg
    125 KB · Views: 164
  • DSC_0822 (800x531).jpg
    DSC_0822 (800x531).jpg
    132.2 KB · Views: 169
  • DSC_0823 (800x531).jpg
    DSC_0823 (800x531).jpg
    141.4 KB · Views: 132
  • DSC_0832 (800x531).jpg
    DSC_0832 (800x531).jpg
    167.4 KB · Views: 216
Last edited:
Signed-In Members Don't See This Ad
What do you have for blanks? I'm interested in the closed mandrel but wouldn't really want to flat rate just that.

Edit. Definately want the jr closed end mandrel along with the blanks I mentioned.

Thanks.
 
Last edited:
Back
Top Bottom