Sedona

Signed-In Members Don't See This Ad

Chuck Key

Member
Joined
May 3, 2005
Messages
1,596
Location
Richmond, Virginia, USA.
One more then I am on to something else. This one has a demonstrator look :)



200832013410_DEMO.jpg



Chuckie
 
Signed-In Members Don't See This Ad

Chuck Key

Member
Joined
May 3, 2005
Messages
1,596
Location
Richmond, Virginia, USA.
Originally posted by Firefyter-emt

Very cool, do I take it that the section uses a standard thread? Is there a chance you would share just what that may be? ;)

The threads appear to be standard but you would not be able to find and off the shelf tap due to the odd diameters used. The thread into the barrel appears to be 1.0. I made the tap for the feeder thread about a year and a half ago and do not remember the exact size. I believe it was .5 but would need to remeasure to verify that. I used a caliper to measure the kit parts then converted the measurements to imperial and used the HF drill pack to get close.

Chuckie
 

bosipipes

Member
Joined
Feb 19, 2008
Messages
79
Location
manhattan, IL, USA.
I was Able to find the tap and die for the front section of a CSUSA Gent pen. I tried it out last night. it is 10 x .75 I did not have a 9.25mm drill so I used 9.2 and it worked out fine.
I found this place on the net and they have alot of odd sizes
http://www.victornet.com/
 
Top Bottom