Resin Saver Molds

[wolftat]

The Original Resin Saver Molds<?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o></o>​

<o></o>

Now you too can have an original Resin Saver mold to do your own casting.​

Don't be fooled by copies and knockoffs​

These molds are made to kit length and have stoppers built in to hold​

the resin out of the tubes. Having the stoppers built in means there is no​

need to build anything to hold the tubes up off of the mold floor and​

no need to hold them down so they don't float​

Simply load the tubes in the mold and pour. Good for labels, decals, skins​

or just casting a clear coating over your blanks. Also good for repairs, since​

you can re-load a broken blank and cast again. Or cut your design into the​

blank and cast again in a contrasting color. Instant inlay!!!!​

Blanks pop out cleanly from the non-stick silicone. Cut them apart and​

square up the ends.. they're ready for the lathe. Molds are made from​

Smooth-On MoldMax 30, which uses the Libra catalyst for longer library​

life. Mold release is still recommended, though. You can make your own​

from mineral spirits and Vaseline. Put it in a jar and shake it up till it won't​

hold any more, then brush it into the mold and allow to dry before pouring.
<o> </o>​

Here's the current crop of molds.​

SWEB, which also does the Wall St II, Elegant Beauty (Berea) Gatsby,​

Sierra, Diplomat, Monet and others that use the same tube. Makes​

up to 8 pens at one time.​

JRGSR does the Jr Gent II, Jr Statesman, Jr Retro, Jr Majestic,​

Jr Victor, Triton, Jr Marshall, Venus and Jr Emperor (and maybe others)​

makes up to 4 pens at one time.​

CIGAR does the cigar pens and pencils, also has other names like​

Big Samoan, Magnum, Big Ben etc. makes up to 4 pens at one time.​

CART mold is used for the Bullet Casing Cartridge pen kits. makes​

up to 8 pens at one time.<o></o>​

AERO does the Aero, Elegant Beauty (Dayacom) and Australiana​

Makes up to 8 pens at one time.​

BNST does the Baron, Sedona, Navigator, Tycoon, Jr Gent (I)​

Rinehart, Orion and any other pens that take those tubes. Makes​

up to 4 pens at one time.<o></o>​

MAJSQ does the Majestic Squire, Diva, Streamline Euro Screw Cap,​

8mm Euro Screw Cap, Rount Top Euro Screw Cap (streamlines and​

euros include both rollerballs and fountain pens) Americans and Flat Top​

Screw Caps, Classic American Snap Cap and Broadwell Art Deco ballpoint​

pens. Makes up to 8 pens at one time.​

GENT does the full Gent, Statesman, Emperor and Majestic pens.​

Makes up to 4 pens at one time.​

CH-ELG handles the El Grande, Cambridge, Canadiana and Churchill kits.​

This mold is a little bit different in that instead of a barrel and a cap in one​

piece, this one casts two caps in one piece and two barrels in one piece.​

Still makes 4 pens.​

Tubes should definitely be painted, as the cap for these pens are very​

thin on material. But if you've made the pens, you already know this.​

CLICK - This mold does everything the SWEB does, but also handles the​

Sierra Click pen kits. It is longer than the SWEB, that is the only difference.<o></o>​

If you're thinking you can buy this mold instead of buying two molds,​

you're smart. That's what I would do, too. Makes up to 8 pens.​

LONGWOOD makes the Clicker ballpoint and Clicker Pencil from CSUSA​

as well as the Longwood Click from William-Woodwrite. Please note that​

this is NOT the Longwood from PSI.​

Due to the 4" length of the blanks, this mold can only make up to 6 pens at a time.​

V-TEX mold will do the Vertex BP, Gemini BP and pencil, Carbara, Patriot,​

Polaris and Atlas pens, Executive Twist from PSI. Makes up to 8 pens at​

a time.​

SW-P mold will do the Sierra style pencil kits. Makes up to 4 pencils​

at one time.​

ZEN-GT mold will do the Zen pen also called the Gran Torino as well as the Dayacom Stretch<o></o>​

​

These molds are also available as Mini's, the mini can hold 2 tubes and will allow you to make one or two pens depending on the style.​

Most designs are in stock, but any mold can be made quickly if you have a special request.​

The cost for these molds are:
$55 for a full size mold
$20 for a mini mold​

Shipping will be added to each order. <o></o>​

Standard shipping is via USPS Priority Mail Flat rate boxes.
International shipping is not a problem.​

Please email any questions or place your order through:​

ResinSaverMolds(at)gmail(dot)com (@gmail.com)<o></o>​