Rattle and Cobra

Signed-In Members Don't See This Ad
See more from alxe24

Status
Not open for further replies.
A

alxe24

Member
Joined
Jan 26, 2007
Messages
667
Location
palmdale, ca.
Here are some castings I made with them. For anyone new to casting skins read the tutorial from Don and don't skip steps such as not painting the tubes; they will show through :(
On the cobra one I can't figure why it seems like the PR did not fully stick to the skin. I cleaned them with denat alcohol to make sure there was mo oils from my fingres. I guess I have to try some more.
Thanks for looking and your comments




2007102592253_Cobra-and-Rattle.jpg


200710259224_Cobra.jpg



2007102592222_Rattle-03.jpg
 
Signed-In Members Don't See This Ad
Originally posted by alxe24
<br />Here are some castings I made with them. For anyone new to casting skins read the tutorial from Don and don't skip steps such as not painting the tubes; they will show through [:(]
On the cobra one I can't figure why it seems like the PR did not fully stick to the skin. I cleaned them with denat alcohol to make sure there was mo oils from my fingres. I guess I have to try some more.
Thanks for looking and your comments
Click to expand...

Sorry to read you are less than pleased with these. Tell you what, send them to me. I will take good care of "orphans" like these. [:D][:p][}:)]

These pens look great from here.

Tim
 
Man, I've got to try some of those. I don't cast, but after seeing those I sure need to buy some. Great pens, the color combination is on the spot. Great photos also.
 
The casting came out great and so did the pens. For tube painting I use a flat green from from colors used in Camoflauge designs. The can's label is CAMO PAINT but I forgot which brand. I get it at Sutherlands just because it is close to me.

I tried some cobra and the skin seemed to soak up the resin and turned very dark and a couple of spots did not allow the resin to stick.

Do a good turn daily!
Don
 
Status
Not open for further replies.
Back
Top Bottom