Purple fountain pen

[Dannv]

Here is the purple pen I mentioned in my previous post. These work with a converter but cartridges are too short. These asre all using a Jowo #6 nib in a standard Jowo housing.

 

[darrin1200]

Hey Daniel. Very unique design. Is meant to be posted while writing?
You may try Standard International Long cartridges.

 

[Dannv]

It can be posted, but with the nib it's 5 inches long, so doesn't need to be. This came out of me wondering if the long section and threads would work for both capping and posting. I think even the long cartridges are gong to be a touch too short but it's worth looking into. I'll have to get some measurements to compare to the length of the converter. And, thank you for the link. I like Goulet Pens. They pack things really well.

 

[magpens]

@Dannv
I like your work very much, Daniel ! ! ! !

Could you please post the link to your "previous post" to which you refer .

Is it this ?

Tried something different

I decided to try something different. Made this one a couple months ago. I have since done a pink one and a purple one with caps made from the same material as the body. Threads are m14 triple start and the body diameter other than the threads is about 12.7mm. The section threads in at the...

www.penturners.org

 

[darrin1200]

My thoughts about the posting, was with the position of the threads. They look like they might rest right on the web, between thumb and finger.

That blue one is gorgeous. What material is this? Acrylic Acetate?

 

[sorcerertd]

That's a really unique design and a great finish! Since posting was mentioned, it made me wonder how well that would work with the threads at the halfway point?

 

[Dannv]

@Dannv
I like your work very much, Daniel ! ! ! !

Could you please post the link to your "previous post" to which you refer .

Is it this ?

Tried something different

I decided to try something different. Made this one a couple months ago. I have since done a pink one and a purple one with caps made from the same material as the body. Threads are m14 triple start and the body diameter other than the threads is about 12.7mm. The section threads in at the...

www.penturners.org

Thank you. Yes, that's it.

 

[Dannv]

My thoughts about the posting, was with the position of the threads. They look like they might rest right on the web, between thumb and finger.

That blue one is gorgeous. What material is this? Acrylic Acetate?

Thank you. I honestly don't remember which type of resin blank I used. I can't cast my own at this point, so it's purchased and I didn't keep an image of the label.

The threads miss the web for me, however, I have also polished the threads to remove the really sharp edge on them. (Just a pass with the buffing wheel.)

 

[Dannv]

That's a really unique design and a great finish! Since posting was mentioned, it made me wonder how well that would work with the threads at the halfway point?

I don't know. Might be interesting to give it a try, although it would make the pen larger at that point.