ALexG
Member
it's being a while that I didn't do any CA finish, and I didn't have this issue before, I was using like 8-10 coats of medium with different wooden pens and the finish shows different type of cracking after one day, like small little mesh cracks or some times like a spiral crack. I tried leaving the blanks for one day before wet sanding,same issue,
I used the lathe at slow speed for not over heating, I used accelerator and 30 secs between coats
any thoughts?
I used the lathe at slow speed for not over heating, I used accelerator and 30 secs between coats
any thoughts?