johnnycnc
Member
SOLD, Thanks Landon!
doing some shop cleanup, here's what I have from my personal stash...
will not separate.
120.00 is a darn good price in my mind, and I'll give 20.00 then to the site when this sells. shipping is extra, at cost, details near bottom.
photo here:
https://plus.google.com/photos/106671545981419528937/albums/5825485615834343745
-star spangled inlay laser blank, for 10mm tubes
-confederate flag laser inlay blank, for jr gent ii
-5 pcs solid brass, 1" dia x appx 1-5/8 long (inlays, bands?)
-6061 aluminum, reamed, to length blanks, no tubes needed, may need to press in may need a touch of epoxy, depends on your fittings. you turn and polish, these are ready for the lathe.
-1 upper lower set for Statesman-Gent
-1 extra lower for Statesman-Gent
- 1 5/8 dia stock, .347ish hole reamed, 2.920 long guessing it's for Carbara polaris
-Majestic Squire twist no tubes any
-5 PKMAJSQ1 gold tn and chrome kits
- 3 PKMAJSQ3 gold tn and black tn kits
-6 wood blanks, 95% turned, tubed they are marked with wood type
-2 acrylic slugs, untouched
-my steel btc bushing, used, have slight lip miscut, i used them so can you
-Sierra Vista no tubes any
-2 gold kits
-2 chrome kits
-4 green circuit board blanks, 99% turned 1 has small crack, a second one may have, other two no problems. a little ca should fix
-brand new set Vista steel BTC bushings, factory sized, appropriate for these VISTA kits
-buckeye burl jr gent ii blanks resand, finish, done.
pic should tell it all, but feel free to ask ??'s you get what you see in the picture, all is described above. again, ask ??'s if you're not sure on anything!
paypal preferred, might take a money order.
shipping is extra at actual rates, USPS only.
post to claim, pm to take care of business.
p.s.: i won't hold your hand on making aluminum or TBC, just don't have time,sorry but have to keep it real!:biggrin:
Thanks, John
doing some shop cleanup, here's what I have from my personal stash...
will not separate.
120.00 is a darn good price in my mind, and I'll give 20.00 then to the site when this sells. shipping is extra, at cost, details near bottom.
photo here:
https://plus.google.com/photos/106671545981419528937/albums/5825485615834343745
-star spangled inlay laser blank, for 10mm tubes
-confederate flag laser inlay blank, for jr gent ii
-5 pcs solid brass, 1" dia x appx 1-5/8 long (inlays, bands?)
-6061 aluminum, reamed, to length blanks, no tubes needed, may need to press in may need a touch of epoxy, depends on your fittings. you turn and polish, these are ready for the lathe.
-1 upper lower set for Statesman-Gent
-1 extra lower for Statesman-Gent
- 1 5/8 dia stock, .347ish hole reamed, 2.920 long guessing it's for Carbara polaris
-Majestic Squire twist no tubes any
-5 PKMAJSQ1 gold tn and chrome kits
- 3 PKMAJSQ3 gold tn and black tn kits
-6 wood blanks, 95% turned, tubed they are marked with wood type
-2 acrylic slugs, untouched
-my steel btc bushing, used, have slight lip miscut, i used them so can you
-Sierra Vista no tubes any
-2 gold kits
-2 chrome kits
-4 green circuit board blanks, 99% turned 1 has small crack, a second one may have, other two no problems. a little ca should fix
-brand new set Vista steel BTC bushings, factory sized, appropriate for these VISTA kits
-buckeye burl jr gent ii blanks resand, finish, done.
pic should tell it all, but feel free to ask ??'s you get what you see in the picture, all is described above. again, ask ??'s if you're not sure on anything!
paypal preferred, might take a money order.
shipping is extra at actual rates, USPS only.
post to claim, pm to take care of business.
p.s.: i won't hold your hand on making aluminum or TBC, just don't have time,sorry but have to keep it real!:biggrin:
Thanks, John
Last edited:
