dplloyd
Member
What is OB Juice????
OB JUICE
- Thread starter dplloyd
- Start date
Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
flyitfast
Member
Check out Capt Eddie Castlin's Youtube videos. It is a mixture of 1/3 DNA, 1/3 BLO, and 1/3 Clear Shellac.
I'll check on the link and post it.
gordon
I'll check on the link and post it.
gordon
This is what I found
O.B.'s Shine Juice
By Capt. Eddie Castelin
O.B.'s Shine Juice
By Capt. Eddie Castelin
Several years ago I attended a demonstration where the turner was making a little bottle
stopper project called the "hidden pill" stopper. He turned a piece of cocobolo and then
sanded it using wax as a lubricant. I hadn't seen this method before and I had created
some nice work with cocobolo and just didn't get the right finish. I thought it was the
secret to a great finish until he pulled out this little squeeze bottle of finish and proceeded
to put a glass finish on it.
The turner was O.B. Lacoste of Lafayette and he soon became one of my mentors. The
product he used was a mixture of shellac, boiled linseed oil and alcohol. We came to call this
concoction
stopper project called the "hidden pill" stopper. He turned a piece of cocobolo and then
sanded it using wax as a lubricant. I hadn't seen this method before and I had created
some nice work with cocobolo and just didn't get the right finish. I thought it was the
secret to a great finish until he pulled out this little squeeze bottle of finish and proceeded
to put a glass finish on it.
The turner was O.B. Lacoste of Lafayette and he soon became one of my mentors. The
product he used was a mixture of shellac, boiled linseed oil and alcohol. We came to call this
concoction
"O.B.'s Shine Juice".
Ingredients:
3 ounces of plain, uncolored shellac. (Zinsser's Bulls Eye Shellac, Clear)
3 ounces of Boiled Linseed Oil. (Do not boil plain linseed oil)
3 ounces of Denatured Alcohol (do not use any other alcohol product)
I use a pint sized mason jar for mixing and long term storage of the materials. Pour exact
amounts into the Mason jar and mix thoroughly. Do not over agitate.
Pour a day's use into a small squeeze bottle (Harbor Freight # 94392-OVGA) for use.
Note: The alcohol will evaporate from open containers and the squeeze bottle. Return what
you don't use to the mason jar for a pure finish.
3 ounces of plain, uncolored shellac. (Zinsser's Bulls Eye Shellac, Clear)
3 ounces of Boiled Linseed Oil. (Do not boil plain linseed oil)
3 ounces of Denatured Alcohol (do not use any other alcohol product)
I use a pint sized mason jar for mixing and long term storage of the materials. Pour exact
amounts into the Mason jar and mix thoroughly. Do not over agitate.
Pour a day's use into a small squeeze bottle (Harbor Freight # 94392-OVGA) for use.
Note: The alcohol will evaporate from open containers and the squeeze bottle. Return what
you don't use to the mason jar for a pure finish.
To use
:
With the lathe stopped, using a paper towel, rub in a good coat, covering all the surfaces of
the piece. Rub it in well and wait a minute, repeat the process. Now, with the lathe running
at 500-1000 RPM, add some finish to the paper towel and apply it slowly to the surface.
Keep the towel moving and the finish spreading. As the shellac adheres, the oil will begin to
catalyze and the alcohol will evaporate. All three steps are necessary for a good finish.
The coating will begin to build as you apply. At some point you will treat the finish as
complete and stop adding material and polish the surface. If it begins to attract the towel
or get gummy, stop lapping and allow it to set for a minute. Start again when it sets up. A
coat of wax makes a finished product with great results.
With the lathe stopped, using a paper towel, rub in a good coat, covering all the surfaces of
the piece. Rub it in well and wait a minute, repeat the process. Now, with the lathe running
at 500-1000 RPM, add some finish to the paper towel and apply it slowly to the surface.
Keep the towel moving and the finish spreading. As the shellac adheres, the oil will begin to
catalyze and the alcohol will evaporate. All three steps are necessary for a good finish.
The coating will begin to build as you apply. At some point you will treat the finish as
complete and stop adding material and polish the surface. If it begins to attract the towel
or get gummy, stop lapping and allow it to set for a minute. Start again when it sets up. A
coat of wax makes a finished product with great results.
As O.B.Lacoste put it one time, "If it was any easier, I'd have to come over to your
house and do it for you."
Leviblue
Local Chapter Leader
Check YouTube for Capt. Eddie Castelin (spelling?). Its OB shine juice. He gives you the mix ratio for the food safe finish. Its good stuff on wood.
dplloyd
Member
Thank You. I'll check out the you tube
flyitfast
Member
Reciepe for OB Juice:
http://eddiecastelin.com/yahoo_site_admin/assets/docs/shinejuice.54184110.pdf
and the video on its use:
#89 O.B. Shine Juice - YouTube
hope that helps.
gordon
http://eddiecastelin.com/yahoo_site_admin/assets/docs/shinejuice.54184110.pdf
and the video on its use:
#89 O.B. Shine Juice - YouTube
hope that helps.
gordon