RonInSpringTX
Member
gonna try again. I looked for another thread, but couldn't see any. Feel free to comment/add your own!!
bin of pen kits, belt sander/bungie cord rack, various upright wood.
overhead wood storage...mostly my prized maple, some curly/birdseye. My brother got me 2 slabs from a bowling alley near where he works. They were throwing them out!! Turns like butter!! Enough for probably 100+ pens!!The large piece is ironwood.
various tools, etc. My 1st lathe, a 4ft Cummins lathe. (only $100)
other peg-board tools w/my floor Rigid drill press & of course my TV!
my 2 stage dust collector on wheels(hooked up to reg 30gal metal trash can, with a top they make/hose going in, one out to catch larger pieces,then just dust goes to the bags), spindle sander, scroll saw, other stuff.
smaller craftsman drill press, new Ryobi bench bandsaw (in a temp place, just for the photo) DeWalt miter saw. Other stuff, bin box, shelves mounted between studs.
downdraft sander table, underneath is a hose gate system going up to my miter saw,(other end w/gate to the dust coll.), other miter saw support is on the right.
miter saw, downdraft table tucked away, other support for the miter.(they both contain separated compartments for screws, etc.)
Craftsman jointer/planer. Craftsman router table. (both on frames/wheels)
larger & smaller belt/disk sanders. Both mounted on same table w/wheels & strip plug underneath. Also a cabinet underneath (not shown)
Craftsman 12" bandsaw, DeWalt 12-1/2" planer. (both on wheels!)
clamps & more clamps, various stains, paints, polys. My portable a/c unit (bottom right)
clamps, a/c, various spray paints, etc. The red trim diagonal doors cover an alcove under the stairwell(inside the house). Alcove has shelf storage inside w/pegboard on the backside of the doors.
Craftsman tablesaw (worm drive), Jet 3sp air cleaner.
(too dark I know)work bench with cabinet/drawers on other side. Various routers, circ saws, biscuit jointer, hand planer, tile saw in cabinet.
right: older Stanley planer. left: Stanley "45" I believe it is a planer & capable of dado & rabbet cuts. Not sure. Both are from the 1920's era or possibly earlier.
from left: 1."Ford" labeled wrench (not sure for a model T or what)
2.pipe wrench??
middle: bottom 2 labeled "P1183". 3rd from bottom labeled "pony alligator wrench". Top wrench unknown. 2nd from right labeled "Cochran speed-nut wrench". Far right unknown, possible hot rivet pliers??
Best for last... mini Jet V.S. lathe & smaller craftsman dust collector.
All comments welcome
thanks, Ronnie
bin of pen kits, belt sander/bungie cord rack, various upright wood.
overhead wood storage...mostly my prized maple, some curly/birdseye. My brother got me 2 slabs from a bowling alley near where he works. They were throwing them out!! Turns like butter!! Enough for probably 100+ pens!!The large piece is ironwood.
various tools, etc. My 1st lathe, a 4ft Cummins lathe. (only $100)
other peg-board tools w/my floor Rigid drill press & of course my TV!
my 2 stage dust collector on wheels(hooked up to reg 30gal metal trash can, with a top they make/hose going in, one out to catch larger pieces,then just dust goes to the bags), spindle sander, scroll saw, other stuff.
smaller craftsman drill press, new Ryobi bench bandsaw (in a temp place, just for the photo) DeWalt miter saw. Other stuff, bin box, shelves mounted between studs.
downdraft sander table, underneath is a hose gate system going up to my miter saw,(other end w/gate to the dust coll.), other miter saw support is on the right.
miter saw, downdraft table tucked away, other support for the miter.(they both contain separated compartments for screws, etc.)
Craftsman jointer/planer. Craftsman router table. (both on frames/wheels)
larger & smaller belt/disk sanders. Both mounted on same table w/wheels & strip plug underneath. Also a cabinet underneath (not shown)
Craftsman 12" bandsaw, DeWalt 12-1/2" planer. (both on wheels!)
clamps & more clamps, various stains, paints, polys. My portable a/c unit (bottom right)
clamps, a/c, various spray paints, etc. The red trim diagonal doors cover an alcove under the stairwell(inside the house). Alcove has shelf storage inside w/pegboard on the backside of the doors.
Craftsman tablesaw (worm drive), Jet 3sp air cleaner.
(too dark I know)work bench with cabinet/drawers on other side. Various routers, circ saws, biscuit jointer, hand planer, tile saw in cabinet.
right: older Stanley planer. left: Stanley "45" I believe it is a planer & capable of dado & rabbet cuts. Not sure. Both are from the 1920's era or possibly earlier.
from left: 1."Ford" labeled wrench (not sure for a model T or what)
2.pipe wrench??
middle: bottom 2 labeled "P1183". 3rd from bottom labeled "pony alligator wrench". Top wrench unknown. 2nd from right labeled "Cochran speed-nut wrench". Far right unknown, possible hot rivet pliers??
Best for last... mini Jet V.S. lathe & smaller craftsman dust collector.
All comments welcome
thanks, Ronnie