dexter0606
Member
After seeing the beautiful job that Kaspar did on that "Redux" blank I was inspired to give it a shot. I went with Corian and some pickguard and black styrene for accents just because it was what I had laying around. This blank was by no means friendly to me. After all the time it took me to put it together it blew up on me when I was half way through turning it. I lost the two wedge sections at the one end of the blank into my dust collection system. I came up with the idea that if I turned the section from the pickguard to the end of thh blank down to the brass tube I would be able to glue a new section on. And it worked, until I got down to almost finished diameter. My skew caught and flipped out one of the wedges again. This time I didn't lose it and was able to re-glue it in place. Didn't take a chance on putting a tool to it again. I wet sanded it to size and then used plastic polish. Dressed it up with a black ti and platinum Sierra Elegeant Beauty. Thanks for the inspiration Kaspar! Jeff
For some reason I can't insert a pic. I'll try later
For some reason I can't insert a pic. I'll try later
Last edited: