robutacion
Member
G'day folks,
Here I am again, for another game and see who is the lucky winner, this time.
I had 2 possible questions options for this game, I can only use one at the time so, at the last minute, I decided to take some pics of the material in question.
I have indeed turned it today, just for this game, I have 5 more of the same that were cut from a bigger blank, there is absolutely no CA on this blank, the finish is no more than 4 fine sanding grits and then Novus 2 as the polishing paste.
The blanks show various resin colours and some aluminium flakes that look like dust on the surface but, is not.
My question is this;
What is the material I used in this casting, apart from the resin and pigments...??
I would like to remind you all of the new conditions I introduced on game #32 and that, is what actually the gift voucher amount will be spent on, and allow the actual winners to make their own choices. The only RULE that I ask you all to respect is that I allow each 1/3 of the value amount (AU$100.00) to be used on the selection of blanks/packs between the 3 main blanks types I make/sell, there is, raw/natural wood blanks, stabilized blanks/packs and Resifills (cast blanks), this means basically that you can select 1/3 of each type or all raw/natural blanks but never the voucher amount of all stabilized or Resifill blanks, I hope this has come clear if not, let me know...!
A voucher code will be sent by PM or email to the winner that will use it to put his/her's order, any freight/shipping is not included in the prize/voucher so, you will be requested at checkout to pay for posting.
Note: One guesse per post and a maximum of 3 guesses sets per member so, pick well...!
Cheers
George
Here I am again, for another game and see who is the lucky winner, this time.
I had 2 possible questions options for this game, I can only use one at the time so, at the last minute, I decided to take some pics of the material in question.
I have indeed turned it today, just for this game, I have 5 more of the same that were cut from a bigger blank, there is absolutely no CA on this blank, the finish is no more than 4 fine sanding grits and then Novus 2 as the polishing paste.
The blanks show various resin colours and some aluminium flakes that look like dust on the surface but, is not.
My question is this;
What is the material I used in this casting, apart from the resin and pigments...??
I would like to remind you all of the new conditions I introduced on game #32 and that, is what actually the gift voucher amount will be spent on, and allow the actual winners to make their own choices. The only RULE that I ask you all to respect is that I allow each 1/3 of the value amount (AU$100.00) to be used on the selection of blanks/packs between the 3 main blanks types I make/sell, there is, raw/natural wood blanks, stabilized blanks/packs and Resifills (cast blanks), this means basically that you can select 1/3 of each type or all raw/natural blanks but never the voucher amount of all stabilized or Resifill blanks, I hope this has come clear if not, let me know...!
A voucher code will be sent by PM or email to the winner that will use it to put his/her's order, any freight/shipping is not included in the prize/voucher so, you will be requested at checkout to pay for posting.
Note: One guesse per post and a maximum of 3 guesses sets per member so, pick well...!
Cheers
George