Daniel
Member
Closed (cancelled)
I will be logging progress of the various items on this list
MM MX set 2 of 100 sets reserved (grits 220 thru over 1500)
Reg. Pads 2X2 1 reserved no limit required
Reg. Pads 3X4 1 reserved no limit required
MX Pads 2X2 28 reserved no limit required
MX Pads 3X4 0 reserved no limit required
Foam Block 3X4 0 reserved no limit required
Micro Fiber Wiper 2 reserved no limit required
I was notified that Woodenwimsies sells Regular Micro Mesh for $11.95
I incourage anyone interested in just reg MM to order it from them.
Group Buy Prices
Regular Micro Mesh has been dropped from the group buy. you can get it at the same price from Woodenwhimsies
MM MX $20.80 (13 grades going as low as 220 grit does not have 12000 mesh though)
3"X4" Foam Block $4.99 (you need this for all the sheet MM items)
Micro Fiber Wiper (polishing cloth) $5.25
Soft Touch Pads (foam pad with MM attached, 2-sided) this is like getting two sets of MM
2"X2" Reg Pad set $12.78 (all 9 grits)
3"X4" Reg Pad set $25.47 (all 9 grits)
2"X2" MX Pad set $18.46 (all 13 grits)
3"X4" MX Pad set $36.79 (all 13 grits)
Please see this post for details concerning MM MX
http://www.penturners.org/forum/showthread.php?t=37953
It has been a very long time since a group buy for Micro Mesh has been offered. So what better excuse do I need. At this time this is a feeler. all prices are based on purchasing 6"X 25' rolls of MM. this will yield 100 sets.
I will accept orders in multiple sizes. example price is based on 3"X6" sheets but if you prefer 6"X 12" this would simply be the price times 4 at this time max width is 6" but MM is available in 12" wide rolls so this can change if there is enough interest in say 12"X12" sheets. the relative price does not change.
Buy is limited to 100 total orders I don't expect to get more than that but 1 roll yields 100 sets so orders will be cut off at that point. any exceptions to that are subject to price changes. Micro Mesh is offered in sheets but at a higher relative price per piece than the bulk rolls. I will work with anyone on custom orders since there is no limit.
there are also a couple of other items that might be interesting to penturners such as polishing cloths and a wider range of grits in MM please refer to this post for more details concerning these products.
http://www.penturners.org/forum/showthread.php?t=37953
some extra details concerning MM MX. there are a few extra grits that MM MX offer that are not in the Regular MM. these grits could lower the available MM to about 240 grit which is where most of us try to start our sanding anyway. the price per sheet is exactly the same as regular MM. If there is enough interest I hope to offer just the additional 4 grits as a test at this time. I can get 6"X12" sheets (at a higher price) that will allow there to be a relatively small number of members to try this "Other kind of Micro Mesh" I just thought that having MM all the way down to 240 grit might be a popular idea. the only difference in MM MX and MM reg is the resin that is used. MM MX used a slightly less flexible resin in order to give better results when polishing metal and other hard surfaces. otherwise it is the same stuff as reg. MM.
OK Post here if you are interested and the number of sets you are interested in. I am sure there are tons of questions after reading these posts so please feel free to post those questions on this thread. you are probably not the only one confused.
Keep in mind this is a feeler and information gathered here will effect how this group buy is modified and customized in the next few days.
Do not be shy about asking for special orders. Micro Surfaces has a lot of products so if yo are in need of any products from them let me know. I am working on getting us a discount on this but no promises.
I will be logging progress of the various items on this list
MM MX set 2 of 100 sets reserved (grits 220 thru over 1500)
Reg. Pads 2X2 1 reserved no limit required
Reg. Pads 3X4 1 reserved no limit required
MX Pads 2X2 28 reserved no limit required
MX Pads 3X4 0 reserved no limit required
Foam Block 3X4 0 reserved no limit required
Micro Fiber Wiper 2 reserved no limit required
I was notified that Woodenwimsies sells Regular Micro Mesh for $11.95
I incourage anyone interested in just reg MM to order it from them.
Group Buy Prices
Regular Micro Mesh has been dropped from the group buy. you can get it at the same price from Woodenwhimsies
MM MX $20.80 (13 grades going as low as 220 grit does not have 12000 mesh though)
3"X4" Foam Block $4.99 (you need this for all the sheet MM items)
Micro Fiber Wiper (polishing cloth) $5.25
Soft Touch Pads (foam pad with MM attached, 2-sided) this is like getting two sets of MM
2"X2" Reg Pad set $12.78 (all 9 grits)
3"X4" Reg Pad set $25.47 (all 9 grits)
2"X2" MX Pad set $18.46 (all 13 grits)
3"X4" MX Pad set $36.79 (all 13 grits)
Please see this post for details concerning MM MX
http://www.penturners.org/forum/showthread.php?t=37953
It has been a very long time since a group buy for Micro Mesh has been offered. So what better excuse do I need. At this time this is a feeler. all prices are based on purchasing 6"X 25' rolls of MM. this will yield 100 sets.
I will accept orders in multiple sizes. example price is based on 3"X6" sheets but if you prefer 6"X 12" this would simply be the price times 4 at this time max width is 6" but MM is available in 12" wide rolls so this can change if there is enough interest in say 12"X12" sheets. the relative price does not change.
Buy is limited to 100 total orders I don't expect to get more than that but 1 roll yields 100 sets so orders will be cut off at that point. any exceptions to that are subject to price changes. Micro Mesh is offered in sheets but at a higher relative price per piece than the bulk rolls. I will work with anyone on custom orders since there is no limit.
there are also a couple of other items that might be interesting to penturners such as polishing cloths and a wider range of grits in MM please refer to this post for more details concerning these products.
http://www.penturners.org/forum/showthread.php?t=37953
some extra details concerning MM MX. there are a few extra grits that MM MX offer that are not in the Regular MM. these grits could lower the available MM to about 240 grit which is where most of us try to start our sanding anyway. the price per sheet is exactly the same as regular MM. If there is enough interest I hope to offer just the additional 4 grits as a test at this time. I can get 6"X12" sheets (at a higher price) that will allow there to be a relatively small number of members to try this "Other kind of Micro Mesh" I just thought that having MM all the way down to 240 grit might be a popular idea. the only difference in MM MX and MM reg is the resin that is used. MM MX used a slightly less flexible resin in order to give better results when polishing metal and other hard surfaces. otherwise it is the same stuff as reg. MM.
OK Post here if you are interested and the number of sets you are interested in. I am sure there are tons of questions after reading these posts so please feel free to post those questions on this thread. you are probably not the only one confused.
Keep in mind this is a feeler and information gathered here will effect how this group buy is modified and customized in the next few days.
Do not be shy about asking for special orders. Micro Surfaces has a lot of products so if yo are in need of any products from them let me know. I am working on getting us a discount on this but no promises.
Last edited: